Datasheet

194

':7>$"%#
#*
30/40A contacts. Current
draw 120mA. Coil
resistance 93 ohms DC.
Can be used with Calrad
95-926 or 95-927 relay
sockets.

$ #*$!%!#
##$
Mates with 95-925 12V relay.

(%%"&#$$"#
C o me s c om pl e te w it h microphone. Has inputs for microphone, auxiliary, phone, and microphone auxiliary.
Also has built-in siren. Chassis size: 6”(W) x 2.75”(H) x 6.5”(D). 45-602 power supply sold separately for AC
use.
$;1/525/->5:9=:
Power Source ............................................................................................ DC 12V (11-16V standard 14.4V)
Input impedance .............................................................................. Mic 200-50K ohm adaptable / Aux. 10K
Input Level ................................................................ Mic -50dB ± 1dB / Aux. -22dB ±1 dB (for rated output)
Output Impedance ....................................................................................................................... 4~16 ohmW
Power Consumption .......................................................................................... Less than 3A at max. output
Siren............................................................................................ Electronic operated automatic waving type
Fog-horn........................................................................................................................... Electronic fog-horn
Dimensions ........................................................................................... 155mm(W) x 150mm(D) x 65mm(H)
Weight.................................................................................................................................................. 0.78kg

"!(#"#
This power amplifier is a very versatile high fidelity amplifier and has many useful applications. A few of these
are as follows: A power amplifier for Walkman or similar type of AM/FM stereo headphone radio, they can be
converted into a high powered stereo system for home use. This can easily be done by connecting the
headphone output from the radio to the input control of the amplifier. As a power amplifier for the auto, van,
camper, trailer and boat, or as a portable system for outdoor use. A public address amplifier for both indoor and
outdoor use.
$;1/525/->5:9=
DC Voltage............................................. 12 to 15V Input Sensitivity .......................... 0.6V at full output
Frequency Response ........................ 10 to 25 kHz Power Output ......... Mono: 15W at 8W. Stereo: 6W
Input Impedance.......................................... Low Z Distortion...................................... 1% @ full output
Size: 3” x 4” x 1"
Size: 6.1” x 5.9” x 2.55"

(%%&!"#!&
Solid-State Audio Amplifier Module with max 5 watt output.
$;1/525/->5:9=
Power Supply Voltage ....... 12-15 V
Frequency Response 10 to 25 KHz.
Input Impedance .................. Low Z
Input Sensitivity ..................... 6 mv.
Power Input............ Mono 6 W., 8W
Distortion ............. 1% @ full output
$1<51= 
#17-C=8;75251<="-35938;75251<=

(%%" "#
Rugged and versatile paging amplifier and mixer. One XLR mic input. Two 1/4” mono mic
inputs.Three RCA auxillary inputs. Independent controls for the microphone and auxillary
inputs allows you to mix and amplify the input signals. Front panel on/off power switch with
L.E.D. indicator. Speaker outputs are screw terminals for 4W, 8W, 70 volt or 100 volt
speakers. Inputs for 110 Vac or 12 Vdc. Detacheable IEC electrical cord. Chassis color:
Black. Includes mounting bracket.
CALRAD
<:9>
#1-<
:>1 All specifications on this page are subject to change without notice
Size: 2.2” x 4” x 1"