Datasheet
CALRAD
190
%#!
% #*
Momentary input, latching output.
Converts old style shunt panel to
new multi-key system. Use to
shunt an interior loop. Use as a
lock-out on commercial systems.
Programable 6/12/24Vdc, SPDT
relay with two (2) LED indicator
outputs.
&)#
! %#!!&
Same specifications as the 95-
898, but with the added feature of
entry/exit time delay circuit. Built-
in 3–10 min, adjustable reset timer
and sound alert entry reminder.
Entry delay loop can be adjusted
from 15 to 60 sec. Exit delay is
preset at 60 seconds. This entry
time delay circuit saves the cost of
an outside shunt switch. Also adds
to your protection of inside control
switching with added nighttime
protection while
at home. Operates
on 6–12 Vdc.
&##
#!&
Versatile, low cost, solid-state
control module with full relay power
output. Excellent protection for the
home, office, apartments,
condominiums, etc. Easy to install.
Features closed and open circuit
loops. Built-in 3 to 11 minute
adjustment reset timer. Will
automatically reset if protective loop
has been closed. The loops may be
armed or disarmed anytime by a
key switch. Operates on 6–12 Vdc.
( !(&$ $!#
Dry circuit, no power required.
Protects up to 32 square feet.
Adjustable operation for N/O,
N/C circuit. Automatic reset .
Peel and stick mounting.
Available in white and gray.
Provides good visible deterrent.
"#$$&#$&#%*
%
Designed to give faultless service,
extra thin, made of black PVC
plastic, can be placed under
existing rugs, mats, etc. Copper bus
is used to connect each segment
together and is timed for long use.
Size: 29"W x 21"L.Normally open.
##!!# !& #
This door announcing device emits a continuous, invisible infrared
beam to the reflector and returns it to the receiver. When this beam
is interrupted it will announce the entrance of the customer by a
pleasant chime or alarm sound (via selector switch). Single-ended
detection technology eliminates the need for a separate transmitter
and receiver. An alignment LED is provided for fast and easy
installation. Features: All parts included for easy, complete
installation. Maximum detection range of 35 feet. Two-chime
maximum hook-up. On-Off switch in-line. U.L. Listed transformer
provided. 35 foot length of AWG #22 wire provided. Operating
voltage of 6 Vdc. Current consumption of 70 mA armed, 1.2 amps
alarmed.
)%#$!$"#%*
Size: 3
”L x 3
”W x 1
"H
Size: 4
”L x 2
”W x 1
"H
Size: 5
”L x 3
”W x 1
”H
#%#!#%'"!%!%##
$ $!# %#*#%$*$%
This unist is perfect for monitoring an entrance or use as an entrance
indicator. Uses Retro-reflective photoelectric sensor. When beamin
interrupted a “ding-dong” sound or optional siren sound will occur.
Speaker volume can be adjusted or turned off. When in siren mode,
sounding time is adjustable from 3 to 30 seconds. Range is up to 22
feet or 7 meters. 9Vdc power adapter is included. All components
plug into each other so no hard wiring is needed.
9/7?01=>412:77:A593
1 Retro-reflective photoelectric sensor
1 Reflector
1 Speaker/electronic chime
1 9Vdc power adapter
Hardware included:
Mounting brackets X 3, Screws X 7, Drywall Anchor X 1
$;1/525/->5:9=:
Sensing Range: ..................................22feet
Voltage Supply:................Sensor = 9-15Vdc
Chime = 12Vdc
Total Current Consumption: .....100mA Max.
Standby Current: .................................25mA
Light Source:.....................................IR LED
Control Output: ............. NPN open collector
................................(DC 30V, 100mA Max.)
Speaker Response Time:..~1 sec. for chime
30 sec. for alarm
Alarm Time Range:....Adjustable 3~30sec. for alarm
Speaker Output:..Chime/Off/Alarm (Select by switch)
4581$5D1
E(BEBE
#1271/>:<$5D1
E(BEBE
$19=:<$5D1
E(BEBE
$1<51= $1/?<5>C//1==:<51=
'5=5>-7<-0:9>41A1.->AAA/-7<-0/:8