Datasheet

&9> %# %
++%,+&)
0-1750MHz, Female to Male
“F” attenuator. 5% tolerance
with return loss of 20dB. 22
gauge spring steel center. DC
power blocking.
 ......... 3dB attenuation
 ......... 6dB attenuation
 ........ 8dB attenuation
 ..... 10dB attenuation
 ..... 16dB attenuation
 ..... 20dB attenuation

&9>#&")
5-1750MHz, insertion loss
0.3dB, return loss 16dB
typical. Nickel plated
machined brass. Passes RF
and blocks DC from the signal
path. Male ‘F’ connector to F-
81 style female. Overall length
1.6”.

.0J5
*+## +*'# ++)
Power passive to one port.
Insertion loss 3.4-5.5dB max.
Port-Port isolation 11-15dB min.
Input return loss 12-15dB min.
Zinc alloy die cast housing.
*+## +
 '#/)$ /)
Size: 2.25” X 2” X 5/8”(W/D/H)
5-2050MHz satellite splitter-combiner
separates or combines off-air TV
antenna and satellite signals from a
single feed-line. High performance
printed board circuitry. Anti-Corrosion
chromate zinc-alloy die cast housing
90dB min RFI shielding - epoxy
sealed back cover. .5” precision
machined ‘F’ connector threads. DC
pass-through current 500mA max.
Insertion loss VHF-UHF 0.5dB -
satellite 1.5dB. Isolation VHF 25dB -
UHF 20dB - satellite 23dB. Return
loss VHF 18dB - UHF 10dB - satellite
12dB.
)&,%
#&") *&#+ &%
+)%*&)$)
75 ohm In/Out, Male ‘F’
connector to Female ‘F’
connector. Eliminates hum bars
or audible hum generated when
A/V components are connected
directly to a cable TV or satellite
system. Isolates ground
potential differences within an
Audio\Video system without
affecting the RF signal.
Frequency range 54-890MHz.
6” long.
5*#&'
$J$'#  )
High quality satellite RF inline
amplifier suitable for DBS or MMDS
satellite applications. Sloped gain
for long cable runs. Epoxy sealed
back cover plate. Power
requirements 12-18Vdc, 45mA. DC
pass through current 500mA
maximum. Output level 105dBuV
maximum. Low noise 5dB - input
return loss 6dB. Impedance 75
ohms - frequency 40-2250MHz.
High performance SMD board
circuitry. Precision machined F-
connector threads. Nickel plated
zinc alloy diecast housing.
159

.0J5
*+## +*'# ++)
Power passive to one port.
Insertion loss 6.6-9dB max.
Port-Port isolation 11-23dB min.
Input return loss 12-15dB min.
Zinc alloy die cast housing.

.0J5
*+## +*'# ++)
Power passive to all ports.
Insertion loss 4-4.5dB max.
Port-Port isolation 12-15dB min.
Input return loss 12-15dB min.
Zinc alloy die cast housing.

.0J5
*+## +*'# ++)
Power passive to all ports.
Insertion loss 6.7-11dB max.
Port-Port isolation 11-15dB min.
Input return loss 12-15dB min.
Zinc alloy die cast housing.
Analog Cable
54-890 MHz
Not for Digital Cable Use

&/ #*,)%
*' "')&++&)
Protects cable, TV
converters, decoders,
satellite receivers, access
cards, VCRs and TVs from
incoming surges and
electrical spikes. Uses a
standard Male-Female “F”
connectors. Frequency:
2GHz,
DC passive, Impedance: 75
Ohms, Insertion loss: .2dB.
CALRAD
*6B:6C+- )+- 446CC@B:6C
-:C:D2=B25@?D96.632DGGG42=B254@>