Datasheet

142
A\V WIRE DISTRIBUTION
SINGLE GANG WALL
PLATE
Angled exit wall plate allows
for inwall cables to be routed
downwards
Hole Dimensions: 1.44” X.35”
28-181-IV ....................Ivory
28-181-WH ................White
28-CEDH1
Single Gang Cable
Distribution Wall Plate
Plastic single gang hood
provides a versatile method of
passing multiple cables from
behind the wall to equipment.
Hoods may be installed in our
70-558 or 70-568 low voltage
brackets and are compatible
with our 28 series designer style
single and multi gang wall
plates. These hoods may be
installed with the scoop facing
in or out of the wall, to suit a
variety of needs.
Dimensions: W 4.13” X L 1.5”
X D 1.5”
Cable Opening: W 1.2” X L 2.3”
Color: White
28-CEDH1-BK
Black Single Gang Cable
Distribution Wall Plate
Plastic single gang hood provides
a versatile method of passing
multiple cables from behind the
wall to equipment. Hoods may be
installed in our 70-558 or 70-568
low voltage brackets and are
compatible with our 28 series
designer style single and multi
gang wall plates. These hoods
may be installed with the scoop
facing in or out of the wall, to suit
a variety of needs.
Dimensions: W 4.13” X L 1.5” X
D 1.5”
Cable Opening: W 1.2” X L 2.3”
Color: Black
28-CER-1
Single Gang Scoop Style
Cable Distribution Wall Plate
Plastic single gang hood designed
for post or retrofit cable installations
as well as for cables with large
connectors. The lower portion of this
bulk wire wall plate is removable so
you can install the plate after the
cables have been installed or
connected. Can be used with our
70-558 or 70-568 low voltage
brackets. Squared single port for
maximum cable capacity. This
retrofit plate is reversible so you can
have the scoop inside or outside of
the wall to suit a variety of needs.
Dimensions: 2.87" W X 4.63" L X
1.56" D
Cable Opening: W 1.56” X H .095”
Color: White
28-CER-2
Double Gang Scoop Style
Cable Distribution Wall Plate
Plastic dual gang hood designed
for post or retrofit cable
installations as well as for cables
with large connectors. The lower
portion of this bulk wire wall plate
is removable so you can install the
plate after the cables have been
installed or connected. Can be
used with our 70-559 or 70-569
low voltage brackets. Squared
single port for maximum cable
capacity. This retrofit plate is
reversible so you can have the
scoop inside or outside of the wall
to suit a variety of needs.
Dimensions: 4.55" W X 4.55" L X
1.75" D
Cable Opening: W 2.975” X H
1.375”
Color: White
28-LV1RP
Single Gang Cable Distribution
Mounting Bracket
Single gang low voltage bulk cable
mounting bracket designed for easy
installation. Can be installed quickly
using a 3.5” hole saw in 1/4" to 1 1/2"
dry wall. Can also be used with our
28 series designer style wall plates.
Dimensions:
3.8" W x 5.6"H x 2.0" D
Total Internal Depth: 1 7/8" Measured
from the back of flange
Color: White
28-LV2RP
Dual Gang Cable
Distribution Mounting
Bracket
Dual gang low voltage bulk cable
mounting bracket designed for
easy installation. Can be installed
quickly using a 4.5” hole saw in
1/4" to 1 1/2" dry wall. Can also
be used with our 28 series
designer style wall plates.
Dimensions:
5 3/8" W x 5 1/4"H x 2 1/8" D
Total Internal Depth: 2"
Measured from the back of flange
Color: White
CALRAD
Visit Calrad on the Web at: www.calrad.com
28 Series - Cable Distribution Wall Plates