Datasheet

CALRAD
100
*7C;7D*75FC;EJ*H;E5:7D
&#,',% +
Double button operation virtually
eliminates accidental triggering.
Sturdy metal case, silver plated
SPST contacts. Prewired for quick
installation. Color beige, contacts
rated for 1 Amp @25Vdc. Size is
1.99”(W) x .99”(H) x 1.74”(D).
$)%0'% 
*. +
3" long,
7
/8" wide, 2
5
/8" mounting
centers. Normally open circuit. Screw
terminals on the rear of switch for
connection.

Same as 40-650 only with normally
open and closed options available.
 +$')*. +
SPST momentary contact. Use in
conjunction with most security
devices. Normally closed (with
plunger depressed). Contact rating
.5 Amp-50 Vdc. Size is 1.84” long x
1.09” wide.
*,)$&,%+
+&#*. +
SPST toggle switch mounted in a
white impact housing. Mounting
centers 2.125”. Overall height 2”, 6”
black flying leads, stripped. Chrome
switch position ID label ON/OFF.
Current rating 3Amps @125Vac,
50Vdc.
 #,$ %,$1)"+
Needed for extending magnet
greater distances when uneven
surfaces exist. Used for 40-750,
751, 752. Over-all length is 8”.
Long tongue is 5.75” and short
tongue is 2.5”.
 '#*+ %0#&%&#)
Used for recessed mounting of
contacts and magnets on steel doors.
Holds magnet or contact in place
away from frame. For use with our 40-
659 contact, magnet. Hole size
3
/4".
Color: grey.
M*+,0
)**&%++. +
*).+)$ %#*
5/8” long switch for tight
installations with short mounting
areas. Switch/magnet case with
ribs for securing in holes, 5/16”
operating gap. Closed circuit
with magnet in place. Available
in white only. 100mA 100Vdc
max., 1A 10Vdc. Contact length
is .78”.
M)**
&%++. +*).
+)$ %#*
Switch/magnet case with ribs for
securing in holes, 5/8” operating
gap. Closed circuit with magnet
in place. Available in white only.
100mA 100Vdc max., 1Amp
10Vdc. Contact length is 1.32”.
*'*+&,# * 
"0*. +*
Sometimes called a shunt lock.
Complete with 2 keys and mounting
hardware. Hook up using screw
terminals. Used with most alarm
equipment and with all Calrad
Alarm Modules.125Vac, 4Amp.
250Vac, 2A. Mounts in 1.8” deep
hole. Bushing length to connectors
1.8”, Mounts in .75” hole.
)&,% *,) +0
"0#&"*. +*
Mounts in
3
/4" hole. 1
11
/16" deep.
3 Amp - 125V.

.............SPST Momentary,
Spring Return
.......... SPST Shunt On/Off
Solder Terminals
'#*+ ##'#,%)
*. +
Completely environmental proof for
window, door protection, etc. Mounts in
3
/4" hole. Mounting centers 1
3
/16". Rating
100mA-100 Vdc max., 1 Amp-10 Vdc
max., 10 watts max. 30” wired leads.
Overall mounting depth 1.7”.
 ............ Normally Closed
 ....... Normally Open and
Normally Closed contacts
(Both with ball depressed.)
Metal Ball
#&.')& #'#*+ 
##'#,%)*. +
Completely environmental proof for
window, door protection, etc. Mounts
in
3
/4" hole. Mounting centers 1
5
/16". Rating 100mA-100 Vdc max.,
1 Amp-10 Vdc max., 10 watts max.
Normally closed switch with 18”
leads. Overall mounting depth 1”.
Includes .1” plastic spacer.
Plastic Ball
-;D;E3>C36A@E:7.743EHHH53>C365A?
Small Slotted
Screw Driver
Required