User Guide
28
Care & Cleaning - Grinder
Cleaning & Unblocking Grinder Burrs, 
Collar, Grind Chamber and Outlet
•  1-2  Months
If the Grinder is used frequently (everyday), 
the Burrs need to be cleaned to ensure 
best performance of the integrated 
Grinder. Regular cleaning helps the Burrs 
achieve consistent grinding results, which 
is especially important when grinding 
coffee beans for espresso.
•  Grind Off Excess Coffee Beans
 -
  The machine is on and in the READY state.
  - Make note of the current Grind Setting 
(to use as the starting point after cleaning).
  - Insert Two Cup Filter Basket into the 
Portafilter.
 - Insert Portafilter into Grinding Cradle.
  - Turn Bean Hopper fully counter-
clockwise to close the Hopper Gates 
and unlock the Bean Hopper. The Bean 
Hopper will pop up slightly.
  -  Place your hand on top of the Bean 
Hopper and push down lightly. 
At the same time push down the 
Portafilter to activate the Grinder. 
Continue grinding until no more coffee 
grinds are emitted from the Grinder.
  - Remove the Portafilter and dispose of the 
waste grinds as these will be too coarse 
for espresso coffee.
  - Remove the Bean Hopper from the 
Grinder Collar and store any remaining 
coffee beans in an airtight container to 
preserve their freshness.
•  Preparing to Clean
  - Turn off the machine, switch off & unplug 
at power outlet.
•  Cleaning Top Burr
  - Fold the two handles up and lift the Top 
Burr from the Grinder Collar.
  - Wash the Top Burr in warm soapy water 
with a mild detergent, rinse & dry.
•  Cleaning & Unblocking Bottom Burr and 
Grind Chamber
  -  Use the Cleaning Brush or a Vacuum 
Cleaner to thoroughly clear the parts and 
surfaces in the Grind Chamber of fine 
coffee grinds. A damp cloth can be used 
to wipe the inside of the Grind Collar.
  -    Allow thorough air drying.
Note: Spots & marks on the surface 
of the Burrs are part of the hardening 
process (for extra-long life). These marks 
do not affect the performance of the 
Grinder or the taste of the espresso.
CAUTION: Care should be taken when 
cleaning Grinder Burrs as they are sharp. 
BARISTA MAX
GRINDER
MANUAL SHOT
CLEAN
BARISTA MAX
GRINDER
MANUAL SHOT
GRINDER
OUTLET
1.TURN
AIR TIGHT 
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN & INSERT ALIGN HOPPER GUIDE
2.TURN
CLEAR OF 
COFFEE BEANS 
& GRINDS
S
PUSH DOWN
PUSH DOWN PORTAFILTER
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE
BARISTA MAX
GRINDER
MANUAL SHOT
CLEAN
BARISTA MAX
GRINDER
MANUAL SHOT
GRINDER
OUTLET
1.TURN
AIR TIGHT 
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN & INSERT ALIGN HOPPER GUIDE
2.TURN
CLEAR OF 
COFFEE BEANS 
& GRINDS
S
PUSH DOWN
PUSH DOWN PORTAFILTER
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE
BARISTA MAX
GRINDER
MANUAL SHOT
CLEAN
BARISTA MAX
GRINDER
MANUAL SHOT
GRINDER
OUTLET
1.TURN
AIR TIGHT 
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN & INSERT ALIGN HOPPER GUIDE
2.TURN
CLEAR OF 
COFFEE BEANS 
& GRINDS
S
PUSH DOWN
PUSH DOWN PORTAFILTER
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE
ONE CUP
TWO CUP
PRESS & HOLD 4 SEC PRESS & HOLD 4 SEC
ONE CUP
OR
TWO CUP
PRESS & HOLD 4 SEC
PRESS & HOLD TOGETHER 4 SEC
MAX
2.8 L
1 L
MIN
20-22g13-15g
MANUAL
1 SHOT 1 SHOT
MANUAL
MANUAL MANUAL
2 SHOT 2 SHOT
1 SHOTMANUAL 2 SHOT
1 SHOTMANUAL 2 SHOT
BARISTA MAX
GRINDER
MANUAL SHOT
CLEAN
BARISTA MAX
GRINDER
MANUAL SHOT
GRINDER
OUTLET
1.TURN
AIR TIGHT 
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN & INSERT ALIGN HOPPER GUIDE
2.TURN
CLEAR OF 
COFFEE BEANS 
& GRINDS
S
PUSH DOWN
PUSH DOWN PORTAFILTER
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE
BARISTA MAX
GRINDER
MANUAL SHOT
CLEAN
BARISTA MAX
GRINDER
MANUAL SHOT
GRINDER
OUTLET
1.TURN
AIR TIGHT 
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN & INSERT ALIGN HOPPER GUIDE
2.TURN
CLEAR OF 
COFFEE BEANS 
& GRINDS
S
PUSH DOWN
PUSH DOWN PORTAFILTER
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE










