User Guide

HHeeaattiinngg EElleemmeennttss
Calorique Thermolar heating elements are factory assembled with
an integral ground shield, adhesive backing and moisture-proof
electrical connections.
Width: 11 inches/280 mm
Maximum Temperature: Do not expose any Thermolar
heating element to tempera-
tures in excess of
180°F/82°C. See pages 7 and
8 for maximum exposure
temperatures of standard
tank types.
Lead Length: 8 feet/3.5 m
PARTS — INSTALLER SUPPLIED
DDuucctt TTaappee
Standard grade duct tape (or equivalent) rated for at least
170°F/76°C.
PPoowweerr CCaabbllee
Used to run electrical power from branch circuit box to the control
unit. The type and length are determined by local code and individ-
ual requirements of the installation.
TToooollss
General electrician’s tools, including screwdriver, linesmans pliers,
wire cutter/stripper, etc.
IInnssuullaattiioonn
Thermal insulation of the type and thickness noted on the System
Components List must be installed on the tank to ensure proper and
safe operation.
Do not cut or otherwise
alter the Thermolar heating
elements.
1
PARTS & SPECIFICATIONS