Owners manual

ENGLISH 7

MEASUREMENT MODES

To change modes, PRESS and RELEASE the Mode Button (M).

1. Laser - Standard Laser Mode is recommended when measuring

distances to larger objects.

2. Pin - P.A.T. (Pin Acquisition Technology) Mode is best used

when measuring the distance to a agstick or smaller objects.

3. Prism - Prism Mode is ideal for courses that have agsticks with

NOTE: Prism Mode will only work properly when aiming at a agstick

with a built-in reector.

- - -

LASER

- - -

PRISM

1. Laser Mode 2. Pin Mode 3. Prism Mode

built-in reectors. Be sure to aim in the general direction

of the built-in reector. For example, if the built-in reector

is located in the middle of the agstick, then aim the laser

towards the middle of the agstick (see diagram on Page 8).