Owners manual

6 HOW TO USE
HOW TO USE
1. While holding the rangender out in
front of you, PRESS and RELEASE the
Power Button to power on the Laser.
Note: Be sure to use both eyes while
looking through the Aiming Scope with
the rangender out in front of you, (DO
NOT aim by bringing the rangender
close to one eye.
2. Align the Red Dot inside the Aiming
Box and aim at your target. PRESS and
RELEASE the Power Button again to
re the laser.
3. The device will make a “beep” sound
and the distance will be displayed on
the LCD Screen.
Note: There could be a slight delay
(1 or 2 sec.) before the distance is
displayed.
158
PIN
Y
INCORRECT