User manual

User Manual – Rev B FCS Series II
4.1.2 System On/Off Circuit Breaker
The circuit breaker located on the bottom left side of the front panel of the unit and disconnec
the three phase Line input. As such, the circuit breaker acts as a power on/off switch for the
FCS Series unit.
When the input current rating of the FCS Series AC power source is exceeded, the circuit
breaker will trip.
ts
Note that for multi-chassis systems, it is recommended to turn the Master unit ON first and then
the Auxiliary unit(s). To turn the s e Auxiliary unit(s) first and then the
Master unit.
ystem off, turn OFF th
California Instruments 48