User manual

User Manual – Rev B FCS Series II
SAC102 Steady State Voltage and Frequency - Rev A
Condition Duration (s)
High Voltage
G high=118V, Fnom=400 Hz - High V 1800
H Vhigh=118V, Flow=380 Hz- High 1800
I Vhigh=118V, Fhigh=420 Hz - High 1800
SAC 103 Tests
SAC 1 Tests
Voltage Phase Difference tests do not apply for single-phase EUT’s.
04 - Revisions B, C, D, E, F
SA 4 C10 Voltage Modulation Rev B - F
Condition Duration (s)
A Vmod F = 1.0 Hz, V = 0.375 Vrms 1800
B Vmod F = 1.7 Hz, V = 0.375 Vrms 1800
C Vmod F = 10 Hz, V = 2.5 Vrms 1800
D Vmod F = 25 Hz, V = 2.5 Vrms 1800
E 1800 Vmod F = 70 Hz, V = 0.375 Vrms
F Vmod F = 100 Hz, V = 0.375 Vrms 1800
G Vmod F = 200 Hz, V = 0.375 Vr 1800 ms
SAC 104 Tests - Revisions A
SAC104 Voltage Modulation Rev A
Condition Duration (s)
A Vmod F = 1.0 Hz, V = 0.5 Vpp 1800
B Vmod F = 1.7 Hz, V = 0.5 Vpp 1800
C Vmod F = 10 Hz, V = 3.5 Vpp 1800
D Vmod F = 25 Hz, V = 3.5 Vpp 1800
E Vmod F = 70 Hz, V = 0.5 Vpp 1800
F Vmod F = 100 Hz, V = 0.5 Vpp 1800
G Vmod F = 200 Hz, V = 0.5 Vpp 1800
SAC 105 Tests – Revisions E, F
SAC105 Frequency Modulation Rev E, F
Condition Duration (s)
A Fmod F = 1 Hz/sec, Fmod Amp = 4 Hz± 2 Hz 1800
B Fmod F = 5 Hz/sec, Fmod Amp = 4 Hz± 2 Hz 1800
C z 1800 Fmod F = 10 Hz/sec, Fmod Amp = 4 Hz± 2 H
D Fmod F = 25 Hz/sec, Fmod Amp = 4 Hz± 2 Hz 1800
E Fmod F = 100 Hz/sec, Fmod Amp = 4 Hz± 2 Hz 1800
California Instruments 145