User manual

User Manual – Rev B FCS Series II
11.6.1 Rev Gision and roup Selection
Revision and Group selection must be selected prior to running the test. Use the up and down
key to access the screen as shown in Figure 11-4
The default Revision is E. Revisions supported are A, B, C, D, E and F. Scroll to the R
entry u g the e the shuttle to change the selection.
The default GROUP is TAC. Groups supported are SAC, TAC, SVF, TVF and SXF. Use
shuttle chan
11.6.2 Opera g Are
Figure 11-4: Revision/Group Menu
EVISION
sin up and down cursor key. Us
the
to ge the group selection.
tin a and Test Selection
Operating area and test define the test to perform. Use the up and down key to access the
11-5
: Test selection Menu
Scroll to the OPArea (Operating Area) and or TEST entry using the up and down cursor keys.
Use the shuttle to change the selection. The OPArea and Test selection offer the choices shown
screen as shown in Figure
Figure 11-5
in Table 11-2.
OPArea NORMAL TRANSFER ABNORMAL EMERGENCY PFAILURE
LIMITS POW INT LIMITS LIMITS THREE
PH DIFF VTRANS COMB
VOLT MOD FTRANS
PREVERSAL
FREQ MOD
DIST TH
VTRANS
TEST:
FTRANS
Table 11-2: Test Selections
California Instruments 142