User manual

User Manual – Rev B FCS Series II
8.3.2 EMERGENCY TEST
AC Sou
1. E tage and F ency minim
2. Emergency Voltage and Frequency maximum
3. e
8.3.3 ABNOR
rce:
m olergency V requ um
Voltage unbalanc
MAL TEST
AC Source:
Voltage Surge
8.4 Front Panel Operation -160
1. Abnormal Voltage minimum
2. Abnormal Voltage maximum
3. Voltage Drop
4.
5. Frequency Transients test (group 1 only)
To perform a test from the keyboard, Press the MENU key several times until the
APPLICATIONS/OPTIONS Menu appears, select the APPLICATIONS screen. The
APPLICATIONS screen will appear as shown in Figure 8-1.
Figure 8-1: Application Menu
Scroll to the RTCA/DO-160D entry using the up and down cursor keys. Press the ENTER key to
select the RTCA/DO 160D main menu. The screen will appear as shown in Figure 8-2.
No as rel g a test. te: The user h to turn on the Output ay before startin
Prior to standard and group is required. Use the
shuttle to select the standard and the group if applicable.
Figure 8-2: DO160 Main Menus
executing a test, selection of the desired test
California Instruments 114