User manual

User Manual – Rev B FCS Series II
1.2 Manual organization and format
All user documentation for California Instruments power sources is provided on CDROM in
electronic format. (Adobe Portable Document Format) The required Adobe PDF viewer is
supplied on the same CDROM. This manual may be printed for personal use if a hardcopy is
desired. To request a hardcopy from California Instruments, contact customer service at
[e-mail]. There will be an additional charge for printed manuals.
This manual contains sections on installation, normal use, maintenance and calibration. The
FCS Series II is equipped with GPIB, USB and RS232C interfaces. A LAN interface can be
specified at the time of order. Refer to the Lx/Ls Series II Programming manual for information
on using the remote control interface and command syntax. The programming manual (P/N
7004-981) is provided on the same CDROM as this user manual.
California Instruments may make updated versions of this manual available from time to time in
electronic format through it’s website. To obtain an updated manual revision if available, check
the California Instruments Manual download page at
www.calinst.com. You need to register as a
customer to obtain free access to manual and software downloads.
California Instruments 11