Instruction manual

75
Table 3-13: TLK Arguments
ARGUMENT EXT DATA
REPORTED
DEFINITION
ALM A
B
C
0
*135.0
*135.0
Default voltage range code.
Voltage Range limit
High Voltage Range.
AMP 0 to 270.0 Programmed voltage Amplitude value in
volts.
APW A,B,C 0 to maximum
apparent power in
KVA
Output KVA
CFG A
B
C
0 to 30
*92
*120
IEEE-488 Listen Address
Configuration Code
Phase C initial Value. 0 for 1ø
CLM A
B
C
See MAXIMUM
CURRENT TABLE
2
1
Defines the maximum current per phase
Defines the power decimal point Defines the
current decimal point
CRL A,B,C 0 to MAX CURRENT
see table
Programmed output current limit.
CUR A,B,C 0 to MAX CURRENT Output current in amps
ELT A
B
C
0000 to 9999
00 to 59
00 to 59
Total accumulated hours (H)
Accumulated minutes (M)
Accumulated seconds (S)
FLM A
B
C
60
45
1200
Default frequency
Low frequency limit
High frequency limit
FQM None 45.00 to 1200 Measured output frequency
FRQ None 45.00 to 1200 Programmed frequency
INI A
C
0000 to 005.0
0 to CRL
Default voltage
Default current limit
SNC None INT or EXT Programmed external sync mode
PHZ A, B, C 0.0 to 359.9 Programmed output phase angle