Instruction manual

38
Table 3-8: Configuration Screens
NO. SCREEN
NAME
EXT ARGUMENT ACTION TAKEN
16 CFG A(LSN) 0-30 Sets the IEEE-488 (GPIB) Listen
Address.
B(CFG) *92 Defines the features enabled for
Power Source compatibility.
C(PHZ) *120 Defines the phase C initial value for
power system configuration.
17 ALM A(RNG) 0 Code that defines the default voltage
range.
B(LLM) *135 Defines the upper limit of the lower
voltage range.
C(HLM) *135 Defines the upper limit of the higher
voltage range.
18 FLM A(FRQ) 60 Defines the default frequency.
B(LLM) *45 Defines the low frequency limit.
C(HLM) *1200 Defines the high frequency limit.
19 CLM A(RNG) Max Current Defines the maximum current limit
value.
B(PRS) *2 Defines the decimal point location for
measured power.
C(CRS) *1 Defines the decimal point location for
measured current.
29 INI A(AMP) 0-5 Defines default voltage.
C(CRL) 0-Max current Defines default current limit.
*NOT USER PROGRAMMABLE. THE VALUES SHOWN ARE FOR A STANDARD
3-PHASE SYSTEM