Instruction manual

3.5.2. DISPLAY SCREENS

A display of data on the front panel LCD display is called a screen. There are five types of

screens: menu, output parameter, measurement, calibration and configuration screens.

Menu screens display the screen abbreviation with its equivalent number. The numeric

value for each item in a menu screen is the code that may be used to select the screen. Table

3-5 through 3-8 show the numeric values for all screens. Without the aid of the tables the

MNU key may be used. The menu screens will display only the programmable features that

are enabled and their associated screen number.

Table 3-5 shows all of the available Output Parameter screens. While viewing any of the

screens, the associated output parameter may be changed from the keyboard.

Table 3-6 shows all of the Measurement screens. When accessing some Measurement

screens up to three seconds may be required to display the screen.

Table 3-7 shows all of the screens for calibrating the output and measurement functions. A

special code is required to access these screens. Refer to Section 4, Calibration.

Table 3-8 shows all of the Configuration screens. The only value that is user programmable

is the IEEE-488 (GPIB) Listen Address.