Instruction manual

32
3.5. FRONT PANEL OPERATION
3.5.1. KEYPAD
The front panel keypad is enabled whenever the REMOTE light is not lit. The AC Power
System may be manually programmed by using the keypad and observing the front panel
LCD display.
Figure 3-4 shows the front panel keypad. Table 3-4 lists each key and a brief description.
While viewing any Output Parameter screen (Ref.Table 3-5), the screens may be viewed in
increasing order by depressing the MON key and in decreasing order by depressing the PRG
key. While viewing the Measurement Screens, the MON and PRG keys work in a similar
fashion. For example, if the AMP parameter screen is displayed, the FRQ screen may be
displayed by pressing the MON key one time. The display will be switched back to the
AMP screen by pressing the PRG key.
Figure 3-4: Keypad