Instruction manual

143
If Key 3 or Key 7 is selected from the "Normal Menu", another screen will appear as follows:
Enter Modulation
Rate in Hz and ENT.
The numeric value must be within the limits for the test performed. See Figure 9-2 and
Figure 9-3.
If Key 4 is selected from the "Normal Menu", the following screen will appear as follows:
Enter Test
Number 1 to 15 and ENT (see Figure 9-4)
9.5. GPIB OPERATION
The following command will be used to execute the appropriate section of DO-160C.
Remote Command
Items contained within square brackets [] are optional.
DO160[A][B][C] :NORMal state :VOLT_FREQ :MINinum
DO160[A][B][C] :NORMal state :VOLT_FREQ :MAXimum
DO160[A][B][C] :NORMal state :VOLTage :UNBalance
D0160[A][B][C] :NORMal state :WAVe form :DISTortion
DO160[A][B][C] :NORMal state :VOLTage :MODulation <numeric>
DO160[A][B][C] :NORMal state :FREQency :MODulation <numeric>
DO160[A][B][C] :NORMal state :VOLTage :UNDer<numeric>
DO160[A][B][C] :NORMAL state :VOLTage :OVER
DO160[A][B][C] :EMERgency :VOLT_FREQ :MINimum
DO160[A][B][C] :EMERgency :VOLT_FREQ :MAXimum
DO160[A][B][C] :EMERgency :VOLTage :UNBalance
DO160[A][B][C] :ABNormal stage :VOLTage :MINimum
DO160[A][B][C] :ABNormal state :VOLTage :MAXimum
DO160[A][B][C] :ABNormal stage :VOLTage :UNDer
DO160[A][B][C] :ABNormal state :VOLTage :OVER