Instruction manual

139
9. RTCA/DO-160C
9.1. GENERAL
The RTCA/DO-160C option is capable of performing all sections of RTCA/DO-160C for the AC
Source signal.
9.2. INITIAL SETUP
Nominal parameters for the AC Power source shall be as follows:
Output Voltage 115V L-N
Output Frequency 400 Hz
Output Phase Angle B 240
C 120
9.3. TEST PERFORMED
9.3.1. NORMAL STATE
1. Normal State Voltage and Frequency test
2. Voltage Unbalance test
3. Waveform Distortion test
4. Voltage Modulation test
5. Frequency Modulation test
6. Momentary Power Interrupt (Undervoltage) test
7. Voltage Surge (Overvoltage) test
9.3.2. EMERGENCY TEST
1. Emergency Voltage and Frequency test
2. Voltage Unbalance test