User manual

L-Series and FCS-18 Graphical User Interface User Manual
Rev C - June 1996 California Instruments 91
Field Type Description
Record 5 Steady state settings
field 1 decimal frequency
field 2 decimal voltage range
field 3 decimal phase mode
field 4 decimal output relay status
field 5 decimal current limit delay
Record 6 Phase A steady state settings
field 1 decimal voltage
field 2 decimal current limit
field 3 decimal phase angle
Record 7 Phase B steady state settings
field 1 decimal voltage
field 2 decimal current limit
field 3 decimal phase angle
Record 8 Phase C steady state settings
field 1 decimal voltage
field 2 decimal current limit
field 3 decimal phase angle
Record 9 Data logging settings
field 1 boolean data logging mode
field 2 decimal file mode
field 3 decimal time stamp format
field 4 decimal log interval time
field 5 string data logging file path and filename
field 6 string data log file user comment line
Record 10 Measurement window settings
field 1 boolean enable/disable voltage measurement
field 2 boolean enable/disable current measurement
field 3 boolean enable/disable phase measurement
field 4 boolean enable/disable real power measurement
field 5 boolean enable/disable apparent power measurement
field 6 boolean enable/disable power factor measurement
field 7 boolean enable/disable phase A measurements
field 8 boolean enable/disable phase B measurements
field 9 boolean enable/disable phase C measurements
Note
: Setup files are fixed format in that they always contain all records and
all fields, even if the data contained in them is irrelevant. For example, a
setup file for a 751L single phase system will still contain data for all three
phases. In this case, data for phase B and C is ignored and can not be
changed from within the LSGUI program.