User manual

L-Series and FCS-18 Graphical User Interface User Manual
Rev C - June 1996 California Instruments 51
7.2 Transient types
The LSGUI program supports several different transient types. Each
transient type and its parameters are described in more detail in this section.
The available transient types are :
no. Type Abbreviation
1. Empty Empty
2. Voltage dropout V Drop
3. Voltage step V Step
4. Voltage surge/sag V Srg/Sag
5. Voltage sweep V Sweep
6. Frequency step F Step
7. Frequency surge/sag F Srg/Sag
8. Frequency sweep F Sweep
9. Voltage and Frequency sweep VF Sweep
10. Delay Delay
The empty type is clearly not an actual transient but merely a place
holder. No transient data is downloaded to registers which have the transient
type field set to Empty.