User manual

L-Series and FCS-18 Graphical User Interface User Manual

Rev C - June 1996 California Instruments 49

Delay field. Whether it represents a sag or a surge will

depend on the steady state voltage present at the time the

transient is executed.

Final V Final voltage value. This is the voltage present at the end of

the transient delay. For voltage steps, this field is disabled

since the Final V would be identical to the Goto V value

anyway.

Goto F Initial frequency value. For transients that affect frequency,

this value will take effect as soon as the register is recalled.

For frequency sweeps, the Goto F value reflects the start

value. For frequency steps, this value is the value set at the

output when the transient register is executed. For

Frequency Sag/Surge transients, the Goto F is the value the

frequency will be at for the time period specified in the

Delay field. Whether it represents a sag or a surge will

depend on the steady state frequency present at the time

the transient is executed.

Final F Final frequency value. This is the frequency present at the

end of the transient delay. For frequency steps, this field is

disabled since the Final F would be identical to the Goto F

value anyway.

Start ø Start angle of transient execution. This value reflects the

phase angle at which the transient will start. Phase angle

fields are optional. If no phase angle is specified, the

transient will start at a random phase angle.

Delay (s) The delay field reflects the amount of final delay after a step

or drop transient. For sweep transients, the delay reflects

the total sweep time. (duration)

Link to: The link field allows linking to other transient registers. Any

This allows lists of transients or a loop of one or more

transient registers to be executed.