User manual

L-Series and FCS-18- Graphical User Interface User Manual
34 California Instruments Rev C - June 1996
5.1 Model Number and Controller type selection screen
The configuration model screen lists all available L-Series models and
controller types. In normal operation mode - (L-Series connected to PC) -
this screen is used for display purposes only. No changes can be made to
the active model number and controller type. When in simulation mode,
changes made to the selected model number and controller type will take
effect when the button is clicked.
To cancel any changes made, click on the button instead. For
help on this screen, click on the button.
If changes are made while an L-Series unit is connected and the user
clicks on the button, the following error message will appear
indicating that model changes can only be made in the simulation mode.