User manual

L-Series and FCS-18- Graphical User Interface User Manual
22 California Instruments Rev C - June 1996
4.4.1 File menu
The File menu allows access to instrument setup files that are stored in
setup files. It also provides the means to close and exit the program. The
following File Menu entries exist :
Submenu Purpose
New Resets all setup information to default values. If an actual
L-Series is connected to the PC, hardware configuration
data remains unchanged.
Open... Opens the
File Open
dialog box. User can select setup file
to load
Save Save present settings to disk setup file. If no setup was
loaded previously, the
File Save As...
dialog box will
appear prompting the user for a name to save the setup
under. If a setup file was opened previously, the new
settings will be used to overwrite the same setup file. To
avoid this, use the
File Save As...
menu instead.
Save As... Save present settings to disk setup file. A ‘
File Save As...
’
dialog box will appear prompting the user for a name to
save the setup under.
Exit Closes the LSGUI program. The IEEE-488 interface is
released and all program elements are unloaded from the
PC’s memory. The same can be accomplished by pressing
ALT-F4 on the keyboard.