Specifications

Value / Power
n n Programmable Power, Low Cost
Cost effective solution for wide range of AC
power tests
n n 800 VA or 1250 VA Output Power
Capable of handling most single phase
applications
n n Front and Rear Outputs
Connect load to front panel outlets or rear
panel terminal block for maximum
convenience
n n 16 Hz to 500 Hz Frequency Range
Utility and Avionics applications
n n High Peak Current Capability
Drives a wide variety of non-linear
loads
n n Remote Control Option
IEEE-488 and RS232C Interface for
automated test applications
Compact AC Power
With European and US outlet
sockets to connect the load, the
801RP and 1251RP programmable
AC power sources are ideal for a wide
variety of applications.
Universal, Power Factor Corrected
(PFC) input allows these products to
be used anywhere in the world to
provide a convenient source of
variable utility power for the testing
and evaluation of domestic and
commercial equipment. All common
line voltage and frequency
combinations are covered.
In addition, the frequency range
covers 500 Hz, making these
products ideal for commercial and
defense avionics applications.
A built in current measurement
function eliminates the need for an
external current shunt or transformer.
Load current of the UUT (Unit Under
Test) can be read directly on the large
LCD display to 0.1 A. For additional
protection, a current limit function can
be set from zero to the maximum
current rating.
Easy To Use Controls
Front panel digital rotary encoders
are used to set voltage and
frequency. These controls have an
analog feel, with the precision and
reliability of digital circuits. Settings
are read directly on the large high
contrast LCD displays.
Dual output voltage ranges of 135
Vrms L-N and 270 Vrms L-N, provide
maximum current at the required
voltage.
The output frequency can be varied
from 16 Hz up to 500 Hz to cover both
avionics and utility power applications.
IEC 1000-3-2 Test Applications
The low total harmonic distortion of
the output makes the 801RP and
1251RP suitable AC sources for IEC
1000-3-2 Current Harmonics pre
compliance testing. Loads requiring
up to 4.6 Arms at 230 Vrms with peak
currents up to 12 A can be tested with
the 1251RP while the 801RP can
supply up to 3.0 Arms. This covers
many loads that fall under the IEC
standard.
Quality Control
For product quality test applications,
the 801RP and 1251RP can be used
to simulate line conditions found
anywhere in the world. This ensures
products destined for export will
operate as designed.
Avionics Applications
As an affordable and reliable
source of 400 Hz AC power, both
units are well suited for commercial
and defense avionics applications.
Both unit can easily be integrated into
avionics ATE systems.
Functional Design
The small form factor and low
weight of these units make them
convenient to use in a variety of
locations. Removable rubber feet
protect the work surface if the unit is
used in a bench top mode. The 3.5
inch height saves valuable rack space
when compared to conventional AC
power sources at this power level.
Program AC Power Worldwide
RP Series
Affordable AC Power Solutions