Owner manual

6
CF-4802_ii_120821.doc Pg 4
INSTALLING SUPPLIES LINES
IMPORTANT: Prior to attachment, flush supply lines to remove
debris that may cause damage or malfunction to valve cartridge.
The following are two types of supply lines (not
included) that may be installed to the valve bodies:
Ballnose riser for exposed application
• Install BALLNOSE RISER (20a) using valve NUT
(10c) to secure riser to valve INLET (10b)
Flexible riser for non-exposed application
• Discard valve NUT (10c) & install FLEX RISER
(20b) to valve INLET (10b)
Final connections
• Attach drain tailpiece to p-trap (not supplied)
• Turn on water supply valves & check for leaks
w
ww.calfaucets.com 5271 Argosy Ave. Huntington Beach, CA 92649 800-822-8855