DVD / VIDEO CD / MP3 / CD - PLAYER DVD105 OPERATION MANUAL
PLEASE READ THE INSTRUCTION CAREFULLY BEFORE OPERATING THIS UNIT. WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture. IMPORTANT Since the CD circuitry may cause interference to other radio tuners nearby, switch this unit off when not in use or move it away from the affected radio tuner.
Getting Started Before attempting to connect, operate or adjust this product, please read these instruction completely and keep this manual for future reference. Dear customers : May we take this opportunity to thank you for purchasing this DVD player. We strongly recommend that you carefully study the operating instructions before operating the unit. Main Features • • • • • • • Fully compatible with DVD, Video CD 1.0/1.1/2.0, CD and MP3 DTS - digital output.
Getting Started Disc types MP3 Audio & Video Disc size 12cm single side, single layer / single side, double layer PAL and NTSC DVD disc Playback time 135min / 240min max. Audio & Video Disc size 12cm / 8cm VCD disc Playback time 74min/20min max. Audio Disc size 12cm / 8cm CD disc Playback time 74min / 20min max Audio MP3 format disc * Player is CD-R, CD-RW compatible. Note: CD-R, CD-RW Discs recorded with writing device can only be used when they are correctly treated.
Safety precautions Warning Attention To avoid electrical shock, do not open the cabinet, refer servicing to qualified personnel only. If smoke, malodor or unrelated noise are emitted from the unit, turn off the power and disconnect the AC power cord. Warning Attention Keep the unit away from flower vases, tubs, sinks, etc. If liquids are spilt into the unit, serious damage could occur. Touching the unit is dangerous especially if during thunder.
Getting Started Accessories AC Line Cord DC Car Adaptor (Cigarette Adaptor) Remote Control AV Cable DC CAR ADAPTOR (Cigarette Adaptor) / CORD The supplied DC car adaptor/cord is designed for use with vehicles equipped with a 12 volt negative ground electrical system only. The equipment is compatible if the negative (-) terminal of the battery is connected to the vehicle’s metal body/chassis. If unsure, contact the vehicles’s dealer.
Remote Control Unit 1 1. 2. 3. 4. 17 18 2 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34.
Getting Started System Connection Warning : Turn off the power and keep AC cord pulled out from the outlet when connecting the system.
Getting Started Front Panel Control (Most of the function can be controlled by remote control unit.) 1 4 2 3 1. 2. 3. 4. 5. 6. 7. 8. 9. 5 6 7 8 Push for OPEN / CLOSE Phone Jack Phone Volume Control Power Switch (Standby ON/OFF) LCD Display ON/Standby LED Remote Sensor Play Button Skip Backward Button 9 10 11 12 13 14 15 16 17 10. 11. 12. 13. 14. 15. 16. 17.
Function Button (Remote Control) POWER Button ( ) [18] The POWER button is used to toggle the DVD player standby mode and power on mode. In standby mode, make sure red LED is on; press the POWER button and the player will turn on, and LED will turn off, initialize, and begin to load the disc if there is a disc present. BOOKMARK Button [28] This button is used to store specific portions of the disc in memory and play them immediately whenever you want without the need to search.
FR Button (Fast Reverse ) [8] This button is used to scan backward through the audio and video at 3-level speeds as X2, X4 and X8. PLAY Button [6] This button is used to play the disc. STOP Button ( ■ ) [25] This button is used to stop the playing of the disc. PREVIOUS Button [34] Press this button to move back to beginning of the previous chapter or track. NEXT Button [32] Press this button to move ahead to the beginning of the next chapter or track.
DIGEST Button [27] Press this button during VCD 2.0 higher playback, 9 frames will appear on screen, use numeric buttons (0 to 9) or / / / cursor buttons to choose one frame. Then press ENTER to start playing from the selected frame. PBC Button [26] This button is used to set PBC function to ON and OFF. When PBC is "OFF", the system will display the menu of VCD. Use Number Buttons ( 0 to 9, +10 ) to make your selection. When PBC is "ON" the system will be in sequential play mode.
4. Press the PLAY button • When playing a DVD, a DVD menu or title menu may appear on the TV. • When playing a VCD/SVCD, a VCD/SVCD menu screen may appear, depending on the VCD/SVCD. • When playing a MP3/CD, a MP3/CD menu screen will appear. 5. Use the cursor buttons to select the desired item • For some discs there is a second menu screen. If so, press the ENTER button to display the next menu screen. • The cursor buttons do not work for VCDs. Use the number button to select the desired item. 6.
• - You change the settings of TV TYPE in SCREEN SETUP in the setup display - You change the settings of PARENTAL CONTROL in CUSTOME SETUP in the setup display. If you do not want to continue playing the disc, to save electricity either, press the POWER button on the player to turn the power off, or press the POWER button on the remote control unit to set the power to the standby mode. PLAYING AT VARIOUS SPEEDS / FRAME BY FRAME Playing the Still Pictures • During playback, press the PAUSE/STEP button.
USING THE MENUS Using the Chapter Menu A DVD is divided into long sections of a picture of music piece called Chapters. When you play a DVD that contains several chapters, you can select the title you want using the chapter menu. to use the chapter feature on your DVD player. 1. Press the SHIFT button • The “title menu” appears on the TV screen. The contents of the menu vary from disc to disc.
PLAYING VCD WITH PBC FUNCTION (PBC PLAYBACK) When playing VCDs with PBC functions (Ver 2.0 discs), you can enjoy simple interactive operations with search functions. PBC Playback allows you to play VCDs interactively, following the menu screen on the TV screen. 1. Start Playing a VCD with PBC functions, following the Step 1 to 4 in Playing Discs. 2. Select the item number you want on the player • Press the number button of the item you want on the remote control unit. 3. Press the ENTER button 4.
THE ITEMS DISPLAYED DIFFER FROM DISC TO DISC --/-- --/-- DVD GUI TITLE Displays the current title. Use the " "/ " " button to move the cursor to the icon. Use the " "/ " " button to select the required title. Press ENTER to confirm the selection. CHAPTER Displays the current chapter. Use the " "/ " " button to move the cursor to the icon. Use the " "/ " " button to select the required chapter. Press ENTER to confirm the selection. TIME Displays the current time.
SVCD / VCD GUI TRACK Displays the current track. Use the " "/ " " button to move the cursor to the icon. Use the " "/ " " button or number buttons ( 0 to 9 ) to select the required track. Press ENTER to confirm the selection. TIME Displays the current time. Use the " "/ " " button to move the cursor to the 00:00:00. Input the time using the Number buttons ( 0 to 9 ), and press ENTER to confirm the selection. AUDIO CHANNAL The Audio Channel selection icon.
SETTINGS AND ADJUSTMENTS This chapter describes how to set and how to adjust using the on-screen SETUP menu. Most setting and adjustments are required to be set when you first use the player. USING THE SETUP DISPLAY Using the setup display, you can do the initial setup, adjust the picture and sound quality, and set the various outputs. You can also set a language for the subtitles and the setup display and limit play back by children. • You can display the setup display only when the player is in stop mode.
SETTING FOR VIDEO Select VIDEO after pressing the SETUP button. • The VIDEO SETUP allows you to set the display according to the playback conditions. System Settings The TV system menu allows the user to specify the display configuration of the TV monitor. Use RETURN and the " "/ " " buttons to select the appropriate settings. • NTSC specifies display output in NTSC format.
SETTING FOR RATING (PARENTAL CONTROL) This section of the SETUP Menu allows users to control the content of movie playback from 1 (Children) to 8 (Adult). Limiting Playback by Children (Parental Control) Select CUSTOMER SETUP after pressing the SETUP button. The Parental Control function allows you to set a playback limitation level. LANG VIDEO AUDIO CHILD OTHER EXIT RATING LEVEL 8 CHANGE PASSWORD CANCEL PASSWORD 1. Use the " "/ " "/ " "/ " " cursor buttons to select CHILD, then press ENTER. 2.
SPECIFICATION Power source (AC/DC Adaptor) Power consumption Laser Signal System Output Digital audio output Phone Jack S-video Video Audio Audio characteristics Frequency AC IN 120V 60Hz DC Out 12V < 35W, approx 12W (standby state) Wave length : 655mm Laser power : Class 1 PAL / NTSC Coxial digital output: pin jack ø3.5mm jack with level control Y output level: 1Vp-p (75Ω); C output level: 0.300Vp-p (75Ω) (PAL), 0.
TROUBLE SHOOTING Check the following guide for the possible cause of a problem before contacting service. Symptom No Power Correction Cause • The power cord is disconnected. The power is on, but DVD • No disc is inserted. player does not work • The TV is not set to receive DVD signal No Picture output. No Sound • The video cable is not connected securely. • The connected TV power is turned off • The equipment connected with the audio cable is not set to receive DVD signal output.
