User Manual

p. 3
• Lay unit upside down on a clean, flat surface.
• Insert one corner of Non-locking Casters (1) into slot (see inset) and attach opposite corner to unit using
Philips Screw (4).
• Repeat for Locking Casters (2).
• Screw Caster with Bolt (3) into Metal Plate (5) and tighten with Hex Wrench (6).
• Attach Metal Plate (5) to unit as shown using Philips Screws (4).
1
4
1
4
2
4
4
4
5
3
2
Step 1