Operating instructions

© Calibre UK Limited Issue 1.30 27 January 2012, W: www.calibreuk.com
T:[phone] F: [phone] E: techsupport@calibreuk..com 21
3.10.5. Blend Curve Type
The blend curve type menu allows to set the blending characteristics. For setting up the overlap the
Align Pattern should be used. Align Patter reduces the image intensity of each pixel in the blend area by
half.
When the blend region set up through the blend width menu and the physical blend match the S-Curve
characteristics can be switched on. The image intensity is gradually reduced from the start of the blend
to the edge of the respective projector image. The S-Curve Value slider allows to control the steepness
of the S-Curve.
A Custom Alpha Map can be layed over the former blend as well. Such custom alpha map has to be
created on a PC and loaded into the file system of HQView (see paragraph 4.5).