Operating instructions

© Calibre UK Limited Issue 2.41 20
th
May 2014, W: www.calibreuk.com
T:[phone] F: [phone] E: techsupport@calibreuk..com 30
The Flicker Filter when turned on is applied to the computer input ports DVI and HDMI. It is not
applied to inputs which are video (Composite, S-Video, Component and 3G-SDI) or to interlaced
modes on DVI and HDMI.
Filter Strength controls the filter weighting of prior field versus current field. Recursion chooses
between vertical filtering of current and prior input fields, or current field and recursive data output
from filter during prior field.
3.11. System
This Menu selection contains functions which are more applicable to system operation than to picture
adjustment.
3.11.1. User
Settings: USER 1, 2, 3, 4
A predefined setting stored under a user name can be selected. Several settings of the HQView5xx can
be stored under a user name. Thus, different users can store their preferred HQView5xx settings and
recall these profiles by picking up their user name from this menu.
Note: Using the Web interface, (any number of) settings can also be stored/restored to/from a PC disc
drive.
The below listed settings are stored per user. All other settings are global and are not stored under a
user name, i.e. they remain in their present state when switching to a different user mode.
Per user settings
"Input", "PIP Input", "PIP Hide", "PIP Size", "PIP Position", "PIP H-Pos", "PIP V-Pos", "Component Color
Space", "Menu Display Time", "OSD Messaging", "Menu Position", "Language", "Optimize for Display",
"Output Mode", "Frame Rate", "Frame Rates", "3G-SDI Data Map", "I/O Lock", "Native Color Temp",
"Output Gamma", "PTZ Enable", "PTZ Setting", "Aspect Lock", "Filter Strength", "Filter Recursion",
"Sync mode", o/p "DVI Color Space", o/p "DVI Range", "3G Level B Stream", "SDI to HDMI Audio Map",
"SDI Audio Routing", "DVI-I Port", "HDCP", "Switching Transition", "OSD Enable", "DVI Port EDID",
"HDMI Audio Support", "PIP Width", "PIP Height"
Per channel per user settings
"Color Temp", "Red Gain", "Green Gain", "Blue Gain", "Red Bias", "Green Bias", "Blue Bias", "Display
Mode", "CCS", i/p "DVI Color Space", i/p "DVI Range", "HDMI Color Space", "HDMI Range", "Pan", "Tilt"
"Zoom H", "Zoom V"
Per mode per user settings (VGA channel only)
"Clock", "Phase"
Per mode per user settings (RGB/YBbPr channel only)
"Component Sync"
Per channel per mode per user settings
"Black-Level", "Contrast", "Hue", "Saturation", "Input Gamma", "Picture Format", "Horizontal Pos",
"Vertical Pos", "Overscan", Geometry "Left Edge", Geo. "Right Edge", Geo. "Top Edge", Geo. "Bottom
Edge", "Sharpness", "Detail", "LTI Level", "CTI Level", "TRNR", "MNR"
Per channel per mode per user settings (and depending on component type setting)
"Black-Level Offset"