Operating instructions

© Calibre UK Limited Issue 2.41 20
th
May 2014, W: www.calibreuk.com
T:[phone] F: [phone] E: techsupport@calibreuk..com
Contents
SAFETY WARNING: 1
INTRODUCTION 2
1.1. General Introduction 2
1.2. Packing List 3
HQVIEW-5XX SYSTEM DESCRIPTION 4
2.1. Product Overview 4
2.2. Product Specification 4
2.2.1. Power Supply Requirement 4
2.2.2. Video Inputs 4
2.2.3. Component Video Inputs 4
2.2.4. 3G-SDI Input 4
2.2.5. Computer (SVGA) Inputs VESA formats 5
2.2.6. HDMI & DVI Inputs 5
2.2.7. Audio Output 5
2.2.8. Display Output 6
HQVIEW-5XX CONTROL 8
3.1. Menu Tree 8
3.2. Introduction 16
3.3. Main Menu 18
3.4. Input 18
3.5. Output 18
3.5.1. Display Type 19
3.5.2. Output Mode 19
3.5.3. Location 19
3.5.4. Frame Rate 19
3.5.5. I/O Lock 20
3.5.6. Native Color Temp 20
3.5.7. Output Gamma 21
3.5.8. Output Config 21
3.6. Colour 22
3.6.1. Black-Level Offset 22
3.6.2. Black-Level 22
3.6.3. Contrast 22
3.6.4. Saturation 22
3.6.5. Hue 22
3.6.6. RGB values 22
3.6.7. Colour Temp 22
3.6.8. Input Gamma 22
3.7. Geometry 23
3.7.1. Horizontal/Vertical Position 23
3.7.2. Edge Control 23
3.7.3. Warp 23
3.7.4. Picture Format 23
3.7.5. Overscan 24
3.7.6. Pan Tilt Zoom 24
3.8. PiP 25
3.8.1. PiP Input 25
3.8.2. PiP Mode 25
3.8.3. PiP Adjust 25
3.8.4. PiP Show/Hide 25
3.8.5. PiP Show/Hide Transition 26
3.9. Multiple Unit 27
3.9.1. Auto Zoom 27
3.9.2. Units Wide/Units High 27
3.9.3. Horizontal Pos/Vertical Pos 28
3.9.4. Blend Width 28
3.9.5. Blend Curve Type 28
3.9.6. Black-Level Uplift 28