Instruction Manual

Page | 19
Creating a Preset in Compressor 3.5.3
First select the ‘+’ button in the Settings window and choose ‘Calibrated P2 AVC-LongG MXF’ in the drop-down menu
This will add a new ‘Untitled Calibrated P2 AVC-LongG MXF’ preset in the Settings window. Make sure that this new
preset is highlighted and then press the ‘Options’ button to open the preset options.
By pressing the ‘Option’ button you will bring up the ‘Options’ panel to configure the preset. See the section below:
Options Panel in Compressor 3.5.3/4.1.2
for setting the different options in your new preset.