Specifications

EN4
General operations
Switching on and off
Pressanybutton to switch the device on. To switch off, press and hold the
/MU button pressed.
Volume
Turn the VOL(3) knob to set the volume.
Switching mute on / off
Press the
/MU button briefly to turn the sound off. Press the /MU button again to turn the sound on again.
Muting is cancelled when receiving a PTY or TA station.
Operating mode
Press the MD button to switch between AUX/TUNER/USB/SD mode.
Display
Keep pressing the BD button to have the following information displayed in turn:
Radio station, time (automatically set with RDS reception), frequency and PTY settings (these RDS functions are
sent by broadcasting services in various volumes; also refer to Section “Radio functions”).
Settings using the SEL(2) button (VOL/BAS/TRE/BAL/FAD)
Press the SEL button on the device. The current volume level is shown. Each further press of the SEL button
accesses the next setting.
The following settings are possible:
1 2 3 4 5
SEL SEL SEL SEL SEL
1. Volume 2. Bass 3. Treble 4. Balance 5. Fader
Turn the VOL(3) knob to change the settings of the menu item displayed.
Further settings using the SEL button (TA/AF/EQ/AVOL/STEREO/LOUD/SPEAKER/LOCAL/ADUST CLOCK)
• HolddowntheSEL buttonforabout2secondsandthenkeeppressingtheSELbuttonuntiltherequiredfunction
isshownonthedisplay.
• TurntheVOLknobtochangethesettingsofthemenuitemdisplayed.
2 sec.
SEL
TA
SEL
AF
SEL
EQ
SEL
AVOL
SEL
STEREO
SEL
LOUD
SEL
LOC
SEL
SPK
SEL
ADJUST
CLOCK
TA - Enabling / disabling Trafc Announcement (trafc information)
TA ON:IfTAmodeisenabled,thedeviceimmediatelyswitchesfromotherstationsoroperatingmodestotheradio
stationthatiscurrentlytransmittingtrafcinformation.
Note: When the TA function is enabled, you can only search for or save stations that are transmitting trafc
information. Stations that are transmitting trafc information signals are denoted in the display by TP.
TA OFF:TheTAfunctionisdisabled.
AF - Enabling / disabling Alternative Frequencies
AF ON:WhentheAFfunctionisenabled,thedevicesearchesforthecurrentstation’soptimumfrequency.
AF OFF:TheAFfunctionisdisabled.
EQ - Equaliser
 Turnthemulti-controllertoselectoneoftheFLAT,CLASSIC,ROCK,POPorEQOFFsettings.Theequaliserwill
bedisabledifEQOFFisset.Theequalisersettingisshownatthebottomofthedisplay.
AVOL - Set the volume when radio is switched on
 TurntheVOLknobtosetthevolumelevelusedwhentheradioisturnedon.
STEREO / MONO - Set the audio output
 TurntheVOLknobtosettheaudiooutputinradiomodetostereoormono.Ifyouarereceivingastereostation,
thestereosymbol
appearsonthedisplay.
LOUD - Enable / disable the loudness function
 TurntheVOLknobtoincreasebaseortreblelevels(LOUDON)ortodisablethefunction(LOUDOFF).When
theloudnessfunctionisenabled,LOUDisshownontherightofthedisplay.
SPEAKERS
 TurntheVOLknobtoturnONorOFFbuilt-inspeakers.