Instructions

ENGLISH ENGLISH
MANUAL
Warning: The negative speaker lead should NOT be grounded,
otherwise it will damage the radio!
III. Operating Instructions for Station Adjustment
Manual step-by-step station adjustment
In the radio state, short press “SEL” button for many times to enter the “CH” (choose radio station) state, and
adjustthevolumeknobtoenter“STEP”(steppedfrequency)state.Andthenshortpress“ ” or “ ” to adjust
thestationstepbystep,andthesystemwillautomaticallyreturnto“CH”stateafter5sec.withoutoperation.
V. Installation Drawing
1. Before installing the radio, place the radio according to the assembly position, and connect the corresponding
speaker line and power line for listening test.
2. Fix the radio only after its running effect is ideal.
Install the radio
1. Install the support on the dashboard,
and bend its partial parts for sticking in
the positions.
2. Connect the power line and speaker line,
andxthexingplateonthecar.
3. Insert the antenna plug and push the
radiointothesupport,andtightenxing
screwsofthexingplate.
Disassemble the radio
Insert both of the tool for disassembling
radio into the gaps on left and right sides
to make them hook the radio, and then
gently pull out the tools to make the radio
separated from the support.
Then disassemble the connecting lines
and unplug the antenna plug.
VI. Wiring Diagram
ISO connector:
WARNING!
To connect the unit, use ISO connectors only.
Ifyourvehicleisn’tequipedwithanISOconnector,pleaseusethe
providedISOloomcable.Thispreventsanincorrectwiredconnection.
Damage caused by faulty wiring: warranty will be void.