Warnings 1. Only connect this unit to a 12V DC power supply with negative grounding. 5. Please don't change the fuse in the power cord without professional guidance, improper fuse may cause damage to this using unit or even cause fire. 1 2. Never install this unit where the operation for safety driving is restrained. 5 6. Please power off this unit at once and send it back to the after-sales service center or the dealer / distributor you purchased from if one of the following symptoms is found: 2 3.
Precautions 1. Never disassemble or adjust the unit without any professional guide. For details, please consult any professional car shop / dealer for inquiry. 2. If the front panel or TFT monitor is squalid, please use a clean silicone cloth and neutral detergent to wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning may result in scratching or decoloration to the applicant. 3.
Contents Before using Front panel.............................................. 1 Remote control........................................ 2 Basic operations Power on / off.......................................... 4 Audible beep confirmation....................... 4 Mute........................................................ 4 Open SOURCE MENU........................... 4 Playing source selection......................... 4 Volume adjustment.................................. 4 Audio control menu.............
Before using Front panel ཱ ི ཱི ུ ཱུ ྲྀ ཷ ླྀ 1. 2. 3. 4. 5. 6. 7. 8. 9. Disc slot. [ ] Key: Press to eject a disc. [ ] Key: Press to turn the unit ON/OFF. [SRC] Key: Switch to the current mode and main menu / Press and hold to adjust the brightness and contrast of the TFT monitor. [VOL / MUTE] Knob: Rotate to adjust volume / Mute audio outputs . Reset the unit. [ ] Key: Call. [ ] Key: Hangup. [ ] Key: Push down the key to release the key block, and take off it.
Before using Remote control 1. [SRC] Key: Select playing source 2. [EJECT] Key: Eject disc 1 16 2 17 3. [AUDIO] Key: Select DVD dialogue 18 4. [VOL+/-] Key: Adjust volume 3 4 5 19 6 7 5. [ZOOM] Key: Image zoom in/out 6. [ 21 7. [WIDE] Key: Change display mode 22 8. [PRESET / ] Key: Select preset radio station 24 25 26 27 28 9. [EQ] Key: Enter/Exit the EQ setting MUSIC 29 iPod 30 13.[VIDEO] Key: Show Video files 10 12 PHOTO 13 VIDEO 10.[GOTO/ ] Key: GOTO search/Call 11.
Before using Install battery Notes of remote control using 1. Aim the remote control at the remote sensor on the unit. 2. Remove the battery from the remote control or insert a battery insulator if the battery has not been used for a month or longer. 3. DO NOT store the remote control under direct sunlight or in high temperature environment, or it may not function properly. 4. The battery can work for 6 months under normal condition. If the remote control can't work, please change the battery. 5.
Basic operations Power on / off turn the rotary encoder on the front panel. When the volume level reaches "0" or "40", a beep sounds, indicating that the adjustment limit has been reached. The TFT screen displays the volume level for 3 seconds. Audible beep confirmation Programmable turn-on volume This feature allows the user to select a turnon volume setting regardless of the volume setting prior to turning the unit off.
RDS operations The unit provides basic functions of RDS, including PI (Program Identification), radio station name , RT (Radio Text), CT (Clock Time), AF (Alternative Frequency), TA (Traffic Announcement) and PTY (Program Type) Selection. AF function Alternative Frequencies Lists are used for the same program service and used in conjunction with the PI code (Program Identification code) to assist automatic tuning.
Radio mode Select radio as playing source Manual store 1. Tune to a station. 2. Touch [ ]. 3. Touch one of the channels P1 to P6 to save the selected band. Open the SOURCE MENU and then touch [RADIO]. Auto store (AS) To select six strong stations and store them in the current band: 1. Select a band (if needed). 2. Touch [AS] on the on-screen controls to activate the Auto Store function. The new stations replace stations already stored in that band.
Playback Insert a disc If there are no audio or video files, but there are picture files supported in the USB stick, the system will enter the picture files menu automatically. If there no above audio/video/picture files supported in the USB stick, the screen will display: There are no audio/video/picture files supported. 2. N o t a l l k i n d s o f U S B d e v i c e s a r e compatible with the unit. Upon inserting a disc, the unit will switch to [DISP] mode automatically. Notes: 1.
Playback DVD menu/title ] icon on the screen to press and hold [ fast forward; Press the [ ] key on the remote control or press and hold [ ] icon on the screen to fast rewind; This function is only available for the DVD discs having “MENU / TITLE”. In full screen playing of DVD disc,touch anywhere except for the upper right corner to display menu on the screen, touch the [MENU] icon and enter the DVD control menu interface, touch the [TITLE] icon and enter the TITLE control menu interface.
Playback step 4. Display the information of searching: Title/ track 5. Exit the setup interface Playback information display Touch the top center area of TFT LCD when playing back DVD and VCD discs and the playback information will be displayed on the top area of the TFT.
Playback On-screen control icons More Audio Sub Music Music file Photo Photo file Video Video file List Playlist 1/2 SCAN Slow playback Slow playback Slow playback Scan playback Scan playback Scan playback DVD angle EN - 10
iPod mode Connect an iPod or iPhone to the USB connector via an iPod cable. Pausing play 1. Touch the [ ] button on the bottom of the screen to pause play. 2. Touch [ ] button again to resume play. Selecting a track Track-up Touch the [ ] button to move to the beginning of the next track. Accessing iPod mode Touch [IPOD] on the main menu to enter iPod menu. 1 2 3 Track-down ] button to move back to the 1. Touch the [ beginning of the current track. 2.
Bluetooth mode Bluetooth is a wireless transmission way for short distance. The built-in bluetooth can connect with the mobile phones having bluetooth function. After connecting, you can control your mobile phone through the unit. You can make or receive phone calls with Bluetooth-enabled phones through the unit. You can also listen to music from a Bluetoothenabled device. Select bluetooth as playing source Open the SOURCE MENU and then touch [BT].
Bluetooth mode Other modes Switch phone call to the mobile If you do not want your passenger to hear your incoming call, you can switch the call to the mobile. 1. During talking, touch [Transfer Call]. The voice is transferred from the unit’s loudspeaker to the mobile phone. AUX Adjust bluetooth settings 1. In Bluetooth menu,touch [Options]. The option menu is displayed. 2. Touch on the selected option to change the setting. ∙ [Bluetooth]: To turn ON or OFF "Bluetooth" function.
Setup ● Clock mode 12Hr: Clock displays 12 hour time using AM and PM. 24Hr: Clock displays 24 hour time up to 23:59. ● Clock Clock appears in the top right corner of the screen during certain operations. Note: The AM/PM indication will change as you continue to adjust the hour past 12. Setup procedures 1.Enter setup mode Press the [SETUP] key on the remote control or touch the setup icon [ ] on the user interface. The following menu appears after entering the setup mode.
Setup ● Load Factory Select “Reset” to restore the factory default settings for the Rating system only. Audio ● Loudness Select low frequency boost only or high and low frequency boost. ● Subwoofer Turns the subwoofer output on or off. ● Sub Filter Select a crossover frequency to set a cutoff frequency for the subwoofer’s LPF (lowpass filter). ● Bass Q Adjust the Q / Bandwidth of the Bass response of the selected BCF (Bass Center Frequency).
Adjust sound Adjust volume Adjust rader/balance To adjust volume, rotate the volume knob on the host car audio. You can also adjust the front and rear speaker balance, the left and right speaker balance,and subwoofer settings. Mute When playback, press the VOLUME knob on the panel or press the [MUTE] key on the remote control, the sound is cut off. To resume sound, press the button again. 1. Touch [EQ] on the screen. 2. Touch [BAL-FAD].
Troubleshooting What appears to be trouble is not always serious. Please check the following points before calling a service center. Problem Cause Corrective action General Unit fuse blown. Install new fuse with correct rating. Unit can not power on Car battery fuse blown. Illegal operation Remote control does not Battery depleted. work Battery installed incorrectly. Improper audio output connection. Volume set too low. Speakers damaged. No/low audio output Heavily biased volume balance.
Troubleshooting (Continued) Problem Cause Corrective action Disc playback Cannot insert disc A disc inside the unit already. Disc is warped or scratched. Disc is dirty or wet. Incompatible disc is used. Disc does not play back Disc is inserted upside down. Disc region code is not compatible with unit. PBC cannot be used PBC is not available on during VCD playback the disc. Repeat or search function is invalid PBC is on. during VCD playback Eject current disc and insert new one.
Device connections Notes of connection ● This unit is designed to be used in a vehicle with a 12-volt battery and negative grounding. Before installing this unit to a recreational vehicle, a bus, or a truck, make sure the battery voltage is appropriate for this unit to be used, otherwise, install a transformer by professional to convert the output voltage to 12V. ● To avoid short circuit in the electrical system, ensure that the negative battery cable is disconnected before installation.
Device connections Parking brake cable connections Reverse driving cable connections EN - 20
Installation and uninstall ISO-DIN Installation This unit is designed to fit into a 2.0 DIN dashboard opening, found in many imported cars. The unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialty shop for assistance on this type of installation. 1. Remove the existing factory radio from the dashboard or center console mounting.
Installation and uninstall Installation using half-sleeve 1. Install half-sleeve in the dashboard. a. Install adapter if necessary (optional). b. Install half-sleeve into adapter or dashboard (use only the supplied screws). Do not force the sleeve into the opening or cause it to bend or bow. WARNING! Only connect the unit to a 12volt power supply with proper grounding. c. Locate the series of bend-tabs along the top, bottom and sides of the mounting sleeve.
Specifications DVD/CD Player Compatible Disc Media: DVD + R / RW (Single and Dual Layer) and CD-R / RW Compatible Media Formats: CD-DA, MP3, WMA, VCD, Xvid, AVI, MPEG 1/2 Signal to Noise Ratio: >95dBA Dynamic Range: >95dB Frequency Response: 20Hz to 20 kHz, -3dB Channel Separation: > 60dB @ 1 kHz D/A Converter: High performance 24-bit / 192 kHz sample rate, Multi-Bit Sigma- Delta Modulator Video Format: NTSC, PAL (auto-detection) Output: 1Vp-p (75-ohm) Input: 1Vp-p (75-ohm) FM Tuner Tuning Range: 87.
Appendix Wiring diagram CAUTION!IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring instructions carefully, or have the installation handled by an experienced technician.
