RCD 272DBTi MANUAL PANEL CONTROLS EQ INT 1. - Power / Mute 2. - CD mode – Previous / next track - RADIO mode – Manual tune(short press) - Seek + / - (long press) - DAB mode – Previous / next station 3. - SRC - TUNER - Disc play (when disc inserted) - USB (when USB connected) - AUX - BLUETOOTH(when BT connected) - iPod (when iPod connected) - DAB 4. 5. 6. - Band switch: - RADIO mode: FM1 -> FM2 -> FM3 -> AM - DAB mode: D1 -> D2 -> D3 - BT mode:Dial / Answer call 7.
RCD 272DBTi MANUAL OTHER INSTRUCTIONS RADIO OPERATIONS Press the Select tuner as playing source Press [SRC ] button once or more to enter RADIO mode. button to open the panel. 2 3 4 5 Selecting the radio band Press the [ BAND / ] button on the panel to select one radio band among FM1, FM2, FM3, AM. Manual tuning During manual tuning, the frequency will be changed in steps. Press the [ ] or [ ] button on the panel to tune in a higher / lower station. 1 1. SD/MMC card slot 2. Disc eject 3.
RCD 272DBTi MANUAL RADIO OPERATIONS Note: Be careful not to press and hold the [PS/AS] button for 1 second or longer, otherwise the auto store function will begin and the unit starts storing stations. Auto store be detected and stored in the memory. Press and hold the [PS/AS] button (1 sec.) to start automatic station search. To stop auto store, press other buttons having radio functions.
RCD 272DBTi MANUAL RADIO DATA SYSTEM OPERATIONS Radio Data System This unit has a built-in “Radio Data System” decoder system that supports broadcast stations transmitting “Radio Data System” data. When using the “Radio Data System” function, always set the radio to FM mode. AF function The AF function switches to a different frequency on the same network in order to maintain optimum reception. * The factory default setting is ON. 1. Set to system setup by long pressing [ DISP ] button. 2.
RCD 272DBTi MANUAL CD/MP3/WMA OPERATIONS Notes: • If you play a WMA file with active DRM (Digital Rights Management), there will be no audio. To disable DR (Digital Rights M Management) When using Windows Media Player 9/10/11, click on Tool -> Options -> Copy Music tab, then under Copy settings, unclick the Check box for copy project music. Then, reconstruct your own responsibility. Usable sampling rates and bit rates 1. MP3: Sampling rate 8 kHz-48 kHz, Bit rate 32 kbps-320 kbps / VBR 2.
RCD 272DBTi MANUAL CD/MP3/WMA OPERATIONS • Discs without the or mark and CDROMs cannot be played by this unit. • Some CD-R/CD-RW discs may not be usable. TEXT Pausing play 1. Press the [ 1 ] button to pause play. “PAUSE ” appears in the display. 2. To resume CD play, press the [ 1 ] button again. Displaying CD titles This unit can display title data for MP3/WMA disc. When SCROLL is OFF, each time you press the [ DISP ] button to change the title display.
RCD 272DBTi MANUAL CD/MP3/WMA OPERATIONS USB/SD/MMC MP3 PLAYBACK Repeat play 1. Loading SD/MMC Card Press into the slot, with the front side at left. Close the panel, the unit will play the music automatically. 2. Take out SD/MMC Card Press SRC button and switch to non CARD mode, open the panel, slightly press the card, take out the card when it was popped out. 3. Loading USB equipment Open the cap, insert the USB into the connector and the unit play the music in the USB storer automatically. 4.
RCD 272DBTi MANUAL SOUND SETTING STEERING WHEEL CONTROL Press the [ EQ ] button to enter sound effect setting mode. First press shows current EQ. Rotate the knob to changes DSP EQ in this order: In any mode, press and hold [ DISP ] button to enter system setup. Press [ ] or [ ] button SWC SET is displayed. OFF -> POP -> ROCK -> CLASSIC -> JAZZ -> CUSTOM 1.
RCD 272DBTi MANUAL iPod & iPhone OPERATIONS Connect on the screen once playback start. 1. Press the [ 3 ] button once or more until “ RPT ON ” appears on the LCD to perform repeat play. 2. Press [ 3 ] button repeatedly until “ RPT OFF ” appears on the LCD to cancel repeat playback. MENU Random play Connect an iPod or iPhone to the USB connector. When connecting a device, the unit will read the In the S-CTRL OFF mode, press [ MENU / ] button,rotate the [V OLU ME] knob select “MUSIC ” or “ V IDEO ”.
RCD 272DBTi MANUAL BLUETOOTH OPERATIONS The Bluetooth allows you to utilize your car’s built-in audio system for wireless mobile phone or music handsfree communication. Some Bluetooth mobile phones have the audio features, and some portable audio players support Bluetooth feature. This system can play audio data stored in a Bluetooth audio device.
RCD 272DBTi MANUAL BLUETOOTH OPERATIONS Note: • Some mobile phones may not be able to transfer data of Phonebook. • Transfer Call You can switch Handsfree call and mobile phone call. ] button during call. Press the [ BAND / • Answering a call You can answer an incoming call by pressing ] button. the [BAND / ] button to reject an * Press the [MENU / incoming call.
RCD 272DBTi MANUAL SYSTEM SETUP In any mode, press and hold [ DISP ] button to enter system setup. Press [ ] or [ ] button to select options, rotate the [ V OLU ME] knob to adjust. CLOCK Press the [V OLU ME] knob, time display blinks. ] or [ ] to choose hour or minute Press [ .Rotate the [V OLU ME] knob toset clock, long press the [V OLU ME] knob to save the clock setting. RETUNE mode Rotate the knob to choose RETUNE-S or RETUNE-L. RETUNE-S or RETUNE-L is time length selection of TA SEEK retune interval.
RCD 272DBTi MANUAL ELECTRICAL CONNECTIONS Wiring Diagram DAB ANTENNA MIC SWC B 2 1 3 4 5 6 7 8 1 A 2 3 4 5 6 7 8 Light 15
RCD 272DBTi MANUAL INSTALLATION GUIDE ANTI-THEFT SYSTEM Installation Opening Installation Procedures This unit can be installed in any dashboard having an opening as shown below. The dashboard should be 4.75mm - 5.56mm thick in order to be able to support the unit. 1. If relevant, remove any other audio system from the car. 2. Insert the mounting sleeve into the 3. 4. 5. as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the opening or cause it to bend or bow.
RCD 272DBTi MANUAL TROUBLESHOOTING The following checklist can help you solve some problems which you may encounter when using the unit. Before consulting it, check the connections and follow the instructions in the user manual. Do not use the unit in abnormal condition, for example without sound, or with smoke or foul smell can Problem General The unit will not switch on. No sound The unit or screen does not work normally. DISC mode The appliance will not play discs. Sound skips due to vibration.
RCD 272DBTi MANUAL SPECIFICATION General Power supply: Maximum power output: Continuous power output: Suitable speaker impedance: Pre-Amp output voltage: Fuse: Dimensions(WxHxD): Weight: Aux-in: Disc Player 12V DC (11V-16V) Test voltage 14.4V, negative ground 75Wx4 channels 20Wx4 channels (4 ,10% T.H.D.) 4-8 ohm 2.0V (CD play mode: 1KHz, 0 dB, 10 K load) 15A 178x50x166mm 1.
