MCD893 Operating Instructions DVD/VCD/CD/MP3/MP4/USB PLAYER WITH FM/MW TUNER, BLUETOOTH, AND GPS NAVIGATION SYSTEM
Safety Precautions Thank you for purchasing this product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this manual in a safe place for future reference. Only connect the unit to a 12-volt power supply with negative grounding. Never expose this unit, amplifier, and speakers to moisture or water for preventing electric sparks or fires.
Safety Precautions Contents Warning Safety Precautions........................................ 1 Features........................................................ 3 Panel Controls............................................... 4 Remote Controls........................................ 5-6 Basic Operations........................................ 6-7 Disc Operations........................................ 7-10 Tuner Operation..................................... 11-12 Bluetooth Operation.....................
Features DVD-R/RW compatibility Button Operation Explanations It is possible to playback DVD-R/RW discs recorded with the video format and Video Recording format. Touch panel key operation It is possible to operate this unit by using touch panel key. Video CDs featuring PBC compatibility Some frequent operations 1) Move cursor It is possible to playback Video CDs featuring PBC (playback control). WMA and MP3 compatibility It is possible to playback WMA and MP3 files.
Panel Controls 10 11 POWER Press button (9) to open the panel. 12 13 14 15 VIDEO 2 IN (Yellow) AUX 2 IN-L (White) AUX 2 IN-R (Red) Press POWER button (7) to turn on/off the unit. 1. - Touch panel 2. - Microphone 3. - Remote sensor 4. - Mute 5. - Select the following sources: >Radio >Disc (when disc inserted) >USB (when USB connected) >AV1 >AV2 (front AV in) >Blue-tooth >Navigation 6. - Navigation 7. - Turn the unit on/off 8. - Press to adjust volume level. 9.
Remote Controls Press to turn on/off the unit. 1 16 2 17 3 18 4 19 5 20 6 21 7 22 8 23 9 24 10 11 12 25 26 13 14 27 28 29 15 Remote control operating range The remote control can operate within a distance of 3~5m. 1. - Select the following sources: >Radio >Disc (when disc inserted) >USB (when USB connected) >AV1 >AV2 (front AV in) >Bluetooth >Navigation 2. - Disc eject 3. - Menu (DVD) 4. - Title (DVD) 5. - Goto search 6.
Remote Controls Basic Operations Replacing the lithium battery of remote control unit Turn on/off the power When the range of the operation of the card remote control becomes short or no functions while operating, replace the battery with a new lithium battery. Make sure the battery polarity replacement is correct. 1. Open the back cover of the remote control unit. 2.
Basic Operations Disc Operation When parking brake applied Insert a disc 1. I f 'PRK SW' cable is connected to hand brake switch, the video display of the TFT monitor will be controlled by driving status, system setup and input video sources. 2. W hen the car is moving ahead, if the video disc is played, the screen appears "WARNING!! Engage Parking Brake to View Video", and blank screen. The above warning screen will prevent the driver watching images.
Disc Operation Stop playback temporarily - During playback, press to pause playback. - The sound will be muted. - Display "PAUSE " in the screen. again to continue playback. Press T o r e s u m e n o r m a l p l a y , r e p e a t t h e operation. A - Turn to main source menu B - Display on screen control menu Stop playback entirely Disc Playback 1. W hen disc inserted, display shows READ. For MP3 or disc with mixed files, reading time may exceed 1 minute. 2.
Disc Operation Random track playback (for CD/ VCD/MP3 Only) You can play all the tracks in random order. 1. During playback, press RDM once or more. - RDM icon will appear on the display. 2. P ress RDM again to select normal playback. Repeat During playback, press REPT once or more. - RPT icon will appear on the display.
Disc Operation DVD Playback Menu CD Playback Menu While playback touch the center of the screen: While playback touch the center of the screen: Touch the icon to access desired function. 1. Display source menu 3. Stop 4. Track skip/seek DVD menu left/right 5. Display Select Menu 6. Audio select 7. Subtitle select 8. Play/Pause/Enter Touch the icon to access desired function. 1. Display source menu 2. Track intro play 3. Stop 4. Track skip/seek 5. Display select menu 6. Repeat play 7. Random play 8.
Tuner Operation TA Mode Radio Menu Some RDS FM stations periodically provide traffic information. TP (Traffic Program Identification) Broadcasting of traffic information TA (Traffic Announcements Identification) Radio announcements on traffic conditions Touch to access desired function: 1. Display source menu. 2. Select previous/next preset station. 3. Touch to tune automatically. P r e s s m o r e t h a n 2 s e c o n d s t o t u n e manually. 4. Touch to select preset station 1-6. 5.
Tuner Operation Bluetooth Operation Note: REG Mode Source menu -> SETTING menu ->RDS Setting menu -> REG ON/OFF. REG ON: AF function will implement the regional code (of the PI) and only stations in the current region can be tuned automatically. REG OFF: AF function will ignore the regional code (of the PI) and stations in the other regions can also be tuned automatically. EON (Enhanced Other Networks) When EON data is received, the EON indicator lights and the TA and AF functions are enhanced.
Bluetooth Operation Exit Pair A f t e r p a i r s u c c e s s fu l l y , i f y o u w a n t t o disconnect, press PAIR button. The TFT of the unit display “EXIT PAIR”, Bluetooth icon disappear. the pairing code (“1234” by default). When to play/pause, and music playback, touch press / key on the TFT or remote control to previous/next track (if the options are available). Dial History 1. Input dial number by the number button on or press key on the the TFT, touch remote control to dial out.
Bluetooth Operation 3. ANSWER ON/OFF Set the automatic answering a call ON/OFF. When ANSWER ON and Paired OK, if there is an incoming call, in 15 seconds, the unit will answer automatically, and voice will be transferred to the unit too. When ANSWER OFF and Paired OK, if there is an incoming call, the unit will not answer automatically until you choose receiving or rejecting. Music Mode A2DP A2DP is short for Advanced Audio Distribution Profile.
Map Card and USB Operation Other Mode Using Map Card (SD/MMC Card) AV IN mode 1. T o open the panel first, press the button on the panel. Insert a map card into the corresponding slot, the unit will load the map and switch to navigation mode automatically, then navigating by the touch screen. 2. To remove the card, you should first select another source, in order to avoid damaging the card, then slide down the panel, press the card slightly, and take off the card after it popped out.
DVD Setup Press SETUP to display setup menu on the screen. Use to select setup items: SYSTEM - LANGUAGE - AUDIO - VIDEO If you forget the password, please enter 0000 to reset a new password. Setting Rating: SYSTEM 1 KID SAFE / 2 G / 3 PG / 4 PG13 / 5 PG-R / 6 R / 7 NC-17 / 8 ADULT The rating of the disc is from 1 to 8: (1) with the most limits when playing. (8) with the least limits when playing.
DVD Setup to will be in the selected language. If the DVD disc does not contain the audio file in the selected language, the dialogues you listened to will be in the default language. You can change the language by pressing [AUDIO] key of the remote controller. VIDEO Subtitle Language Select one language that you are familiar with to display DVD subtitles. If the DVD disc has the subtitle file in the selected language, the subtitle will be displayed in the selected language.
System Setup Sound Effect & TFT Setup Touch SEL on the TFT, or press SEL button on the remote control to enter SELECT menu. Touch the TFT or use remote control to adjust Audio/Video settings: Audio: EQ sound effect(Flat-Pop-Rock-Clas.-OFF)/BASS/TREBLE/BALANCE/FADER Video: BRIGHTNESS/CONTRAST/COLOR/DIM SETUP Menu Source menu -> Setting menu -> Setup menu Touch the adjust icon on left or right to select. Touch the up/down icon to access next/previous list. 1. Display Source Menu 2. List up/down 3.
Device Connections Notes of connection • T his unit is designed to be used in a vehicle with a 12-volt battery and negative grounding. Before installing this unit to a recreational vehicle, a bus, or a truck, make sure the battery voltage is appropriate for this unit to be used, otherwise, install a transformer by professional to convert the output voltage to 12V. • T o avoid short circuit in the electrical system, ensure that the negative battery cable is disconnected before installation.
Device Connections Parking Brake Cable Connections Reverse Driving Cable Connections Steering Wheel Control Cable Connections Key A: Connect to steering wheel control cable SWC Key B (standby) Key A Key B GND GND EN - 20
Electrical Connections Wiring Diagram SWC (Steering Wheel Control) GPS Antenna AUX 1 IN-R (Red) AUX 1 IN-L (White) FRONT AUDIO OUT-R (Red) FRONT AUDIO OUT-L (White) REAR AUDIO OUT-R (Red) REAR AUDIO OUT-L (White) USB SLOT VIDEO 1 IN(Yellow) CAMERA IN (Yellow) VIDEO OUT 2 (Yellow) VIDEO OUT 1 (Yellow) Radio Antenna in ISO Connector Fuse 15A PARKING (Green) CAMERA (Pink) + SUB.
Installation Guide 1. If relevant, remove any other audio system from the car. 2. After unscrewing the four car radio attachment screws, insert the mounting sleeve into the dashboard. Fix it firmly in place by folding down the metal tabs. 3. If this has not already been done, attach the brackets (2x) to the car radio. In order to do this, use the supplied flat head screws (M5x6mm). 4.
Troubleshooting The following checklist can help you solve the problems which you may encounter when using the unit. Before consulting it, check the connections and follow the instructions in the user manual. Problem General Possible cause Solution Car ignition is not on. Cable is not properly The unit will not switch on. connected. Fuse is burnt. Volume is set at minimum or No sound the mute function is on. The unit or screen does The unit system is unstable. not function normally.
Specifications General Power supply 12V DC (11V-16V) Test voltage 14.4V, negative ground Maximum power output 45Wx4 channels Continuous power output 30Wx4 channels (4 10% T.H.D.) Suitable speaker impedance 4-8 ohm Pre-Amp output voltage 2.0V (CD play mode: 1KHz, 0 dB, 10K load) Fuse 15A Dimensions (WxHxD) - Chassis 178x100x164mm - Nose 170x105x21 Weight 3.0kg Aux-in level 300mV Sub-woofer out 4.
CLASS 1 LASER PRODUCT
