INSTRUCTION MANUAL MCD 782 CAR MULTIMEDIA SYSTEM DVD/MPEG4 PLAYER 1 MIC TA ST 4 RDM MODE 5 2 INT 6 RPT GOTO BND AF REG PTY LOC AS/PS DVD/VCD/CD/CD-R/CD-RW/MP3/MPEG4 Compatible Anti-Shock Mechanism FM Stereo Radio PLL Synthesizer Tuner RDS (Radio Broadcast System) Function Front Panel USB Input Port SD/MMC Memory card slot Built-in Bluetooth hands-free system Front panel AV input AV Output Socket Sub-woofer Output Socket 3” Widescreen Digital TFT LCD Display ISO Connectors for Power Supply and
CONTENTS Safety Information.........................................01 Installation....................................................02 Using The Detachable Front Panel..............04 Wiring Diagram.............................................05 Operations....................................................06 Location and Function of Keys ...................... 06 Using The Remote Control.............................07 General Operations......................................08 Radio Operations...........
Safety Information CAUTION: Mobile DVD player is a class 1 laser product. However this mobile DVD player uses a visible/invisible laser beam which could cause hazardous radiation exposure if directed. Be sure to operate the mobile DVD player correctly as instructed. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Do not open covers and do not repair yourself. Refer servicing to qualified personnel.
Installation Preparing New Discs with Rough Spots A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ballpoint pen or pencil as shown on the right. To remove the rough edges, press the side of the pen or pencil against the inside and outside edges of the disc.
1. DIN FRONT-MOUNT (Method A) Installation Opening This unit can be installed in any dashboard having an opening as shown below: 53 mm 182 mm Installing the unit Be sure you test all connections first, and then follow these steps to install the unit. 1. Make sure the ignition is turned off, and then disconnect the cable from the vehicle battery's negative (-) terminal. 2. Disconnect the wire harness and the antenna. 3.
Removing the unit 1. Make sure the ignition is turned off, and then disconnect the cable from the vehicle battery's negative (-) terminal. 2. Remove the metal strap attached the back of the unit (if attached). 3. Press the release button to remove the front panel. 4. Lift the top of the outer trim ring then pull it out to remove it. 5. Insert both of the supplied keys into the slots at the middle left and right sides of the unit then pull the unit out of the dashboard.
Wiring Diagram White: Rear Left CH RCA output Socket Red : Rear Right CH RCA output Socket Green : Subwoofer output Socket Bluetooth Antenna Radio Antenna Socket Yellow: Video Output Socket 1 White: Front Left CH RCA output ISO CONNECTOR Yellow: Video Output Socket 2 Red : Front Right CH RCA output YELLOW MEMORY B+ PINK/BLACK TO PARKING BRAKE BBLACK GROUND B- BLUE TO ANTENNA RED ACC B+ FRONT LEFT SPEAKER REAR WHITE GREY WHITE / BLACK GREY / BLACK GREEN VIOLET GREEN / BLACK VIOLET / BL
3 1 1 MIC 6 7 9 15 13 TA ST 4 RDM MODE 4 2 5 AF REG 6 PTY LOC INT 16 20 14 5 RPT GOTO BND 17 21 12 2 AV AS /PS 18 10 8 11 23 22 24 25 19 IN
Using The Remote Control 1 DISP MODE RPT SUB-T MUTE 2 3 A-B 5 ZOOM 16 AUDIO 17 18 4 19 (23) Fast Forward Button, Button (24) Fast Reverse Button, # Button (25) GOTO Button AS/PS (Automatic Search & Preset memory Scan) Button (26) (Stop) Button, DEL (Delete) Button (27) PROG(Programmed play mode) , LOC/DX Button (28) RDM (Random) Button, MO/ST Button (29) Numeric 0,+ Button, BAND Button (30) PTY(Program Type) Button, Numeric 9 Button Remark: ANGLE 20 6 ENTER VOL 7 8 21 MENU SETUP 22
General Operations 2. Replacing the battery Replace the battery with the same type and the (+) side facing up. 3. Closing the cover Gently push in the holder until securely locked into place. Reset the unit Operating the unit for the first time, after replacing the car battery or changing the connections, you must reset the unit. 1.Turn off the unit power. 2.
Last position memory feature - During disc, USB, SD/MMC card playback, press and hold the POWER button to turn off the unit, when you next switch on it, the unit will resume playing from the point that it was interrupted. -During disc, USB, SD/MMC card playback, press the MODE button to switch to a different mode, when you next return to the previous disc, USB, SD/MMC card playback mode again, the unit will resume playing from the point that it was interrupted.
Auto store / Preset scan - Preset scan: Press the AS/PS button to scan each preset station. It will play a station for a few seconds, then go to next station until all 6 stations are scanned, finally the radio will play at the preset station where scanning started. The preset station number on the LCD will flash during the process. When you hear a station that you wish to listen to, press the AS/PS again to stop the preset scanning.
TA interruption function The current traffic announcement is cancelled by pressing the TA button. But the TA mode will not be off. To select program type Briefly press the PTY button to enter or exit the program type list. After turing on the PTY list, the display as follows: Stereo/mono FM1 STEREO LOC Frequency 100.7 TA AF REG ALARM PTY MHZ HGTES234 ALARM NEWS PTY list AFFAIRS 07 : 12 VOL 25 AV Menu Overwiew You can adjust various settings of the unit from the AV menu.
Audio Menu Picture Menu PICTURE AUDIO VOLUME 00 FADER BASS 00 EQ 00 LOUD OFF SUB.W OFF TREBLE BALANCE L.R R.F FLAT BRIGHT 32 TINT CONTRAST 32 DISP.M COLOR 32 DEFAULT 32 16:9 1. Press the or button on the head unit, or ▲/▼/◄/► button on the remote control to select a menu item to adjust. 2. Rotate the VOL+/- knob on the head unit, or press the VOL+ or VOL- button on the remote control to adjust the item you have selected. 1.
Setup Menu Disc Operations SETUP SYSTEM CLOCK SYSTEM TIME TIME.M ON 24 CLOCK 11 : 58 Hour Loading/Removing a Disc 1. Press the OPEN ( ) button on the front panel to flip down the front panel and then insert a disc into the disc slot with the label side facing upward; and close the front panel, the player will play the disc automatically. 2.To eject the disc, press the OPEN ( ) button to open the front panel and then press the EJECT ( ) button. Minute 1.
select a file or folder, then press the ENTER button to confirm your selection. If you select a file, it will be played. If you select a folder its contents(files) will be displayed in the file list. For CD/VCD/SVCD: REP 1 REP ALL REP OFF For CD: For DVD: REP CHAPTER Single Track Selection Press the or button on the head unit to skip to the next or previous track.
disc. Press it again to stop intro scan and return to normal playback. Multi-Audio Language For DVD: For DVD discs which have multiple language soundtracks, you can press the AUDIO button to switch between the audio languages recorded on the disc. Note: - The number of available languages varies from disc to disc. - Some discs only contain one soundtrack language. - Not all discs will allow changing the audio language during playback. In these cases, select audio language from the DVD’s menu.
- The function only works for discs having scenes recorded at different angles. ZOOM Function Press the ZOOM button repeatedly to enlarge or reduce the size of image according to the disc as follows: ZOOM 2 ZOOM 3 1 / 2 ZOOM 1 / 3 ZOOM OFF ZOOM 4 ZOOM ZOOM 1 / 4 In zoom in mode, press the cursor button ( ▲/▼/◄/► ) to move the zoomed-in area.
4 3 Data Disc Play Operations PBC - To search for a particular Title, Chapter, or Track 1. Use the cursor button ( ▲/▼/◄/► ) to highlight 1 (track number), 2 ( chapter number) or 4 (VCD track number). 2. Then enter a number with the number button to input the desired Title/Chapter, Track, then press the ENTER button to confirm your selection. - To search for a particular point by playing time 1. Use the cursor button ( ▲/▼/◄/► ) to move to 3 (time). 2.
USB Operations Using the USB stick: This disc player features a front panel USB interface. A USB device can be connected to this port. When you insert a USB stick through the port, the DVD player will search for the MP3/WMA files and start to play them automatically. If you insert a SD/MMC card into the SD/MMC card slot or a disc into the disc slot while reading the USB stick, the unit will play the disc. You can press MODE button to switch to USB playback mode.
Bluetooth Hands-free Function When link up your mobile phone to this bluetooth hands-free system, you can dial or receive calls via this blutetooth device during driving. You can also transmit the audio data(music) from a mobile phone to the DVD tuner via this blutetooth device. Sound and picture will be automatically off when there is an in-coming call. Voice comes out from your car speakers and the built-in microphone receives your voice.
manual answer. DEFAULT: Restore to the default setup. you can also use this function with the hands-free system. Use ▲/▼ cursor button to select the item. Press the ENTER to enter the current menu item. Press the ZOOM button to exit from current menu. Press the BT MENU button exit bluetooth menu. Note: To operate this function according to the instruction manual of your mobile phone.
Setup In DVD mode, when the disc is playing or in stop mode, press the SETUP button to enter the setup menu. 1. When the SYSTEM SETUP icon in the upper part of the menu is highlighted, use the ◄/► button to move between the different setting pages. 2. Press the ▼ button to move the cursor to the list of options below. Then you can use the ▲/▼ button to move between the different setup options 3.
Playing a video recorded in one aspect ratio on a monitor with a different ratio can result in some mismatches and undesirable display distortion or cutoffs. Read the following to assist you in setting up the TV type: 4:3 PS (PAN SCAN) Select this when connected to a conventional 4:3 size monitor. The picture will fill the entire TV screen. However, due to the mismatch in aspect ratio, parts of the movie at the extreme left and right sides will not be visible when playing a 16:9 format movie.
Language Setup When you open the language setup page, you will see the following screen: 1. AUDIO OUT: Change among SPDIF/OFF, SPDIF/RAW and SPDIF/PCM. 2. KEY: Change among b, -4, -2, 0, +2, +4, #. Digital Setup When you open the DIGITAL SETUP menu, you will see the DIGITAL SETUP screen: This menu provides many choices for the menu, DVD and subtitle languages.
Playing MP3 discs Attachment About Parental Controls Commercially-recorded DVD discs have parental level assignments. The range of parental controls is from 1 to 8. In general, this range corresponds to established movie rating systems. Movie rating systems may vary depending on the country in which you live. At the bottom of this page is a chart showing the rating system and corresponding Parental Control ratings for the USA. The player can be set in a similar way.
“Progressive” (typically used for website display) or “lossless” (an older format which is rarely used today) JPEG files cannot be played. So be sure you are saving the files in the proper format. If you play a progressive or lossless JPEG image, a black screen will appear. When you next select a baseline image, you may experience some delays. Playing MPEG discs - This unit can play back MPEG 1 or 2 files with the extension code <.mpg>. - Audio stream should conform to MPEG1 Audio Layer 2.
No Sound ♦ Check the audio connections. The Player Does Not Respond to the Remote Control ♦ Aim the remote control directly at the sensor on the front of the player. ♦ Remove any obstacles which may interfere with the signal path. ♦ Inspect or replace the remote control battery. Picture is distorted or Only Black and White ♦ The disc format is not according to the TVset used (PAL/NTSC). Select the proper setting in the TV SYSTEM menu. No Audio at Digital Output ♦ Check the digital connections.
