Instruction manual
EN-8
• During conversation, press “
” button to end call.
• When there is incoming call, press “
” button to receive call.
• Press “
” button to reject incoming call.
Audio Streaming
1. If your phone is “A2DP” format is compatible, you can play music in your mobile and the music will be transferred to
car audio unit.
2. Make sure your mobile and the car radio unit is paired and connected.
3. Play the music in your mobile according to your mobile operating method.
4. Unit will display “A2DP” when receiving A2DP music automatically, but for some mobile your have to press
LD/MOD
button to change A2DP mode.
5. You can press
or on head unit for previous or next tracks.
RESET
Reset button is placed on the housing.
The reset button is to be activated for the following reason:
• Initial installation of the unit when all wiring is completed.
• All the function button do not operate.
• Error symbol on the display.
TECHNICAL SPECIFICATIONS
MP3/WMA PLAYER SECTION
Signal to Noise Ratio > 60 dB
Channel Separation > 50 dB (1kHz)
Frequency Response 20Hz - 20 kHz
TUNER (FM)
Frequency Range 87.5-108 MHz
Channel Step 50 kHz
Intermediate Frequency 10.7 MHz
Sensitivity 2.8 µV
Stereo Separation 30 dB
Signal to Noise Ratio > 50 dB
LINE-OUT
Output 1.5V (max.)
Impedance 10k Ohm
GENERAL
Power Supply 12V DC (10.8-15.6V allowable)
Speaker Impedance 4 or 8 ohm
Output Power 75W x 4CH
Fuse 10A
Note: Specications and the design are subject to possible modication without notice due to improvement.
RESET