Specifications

HOW TO ORDER PARTS
Tennant 5300 (11–00)
60
PLACING AN ORDER
The components used in this machine have been
carefully selected for performance and safety. Use
only manufacturer’s specified or equivalent parts.
When ordering parts, please furnish all of the
following information:
1. Machine serial number - shown on the
machine data plate.
2. Company name.
3. Shipping address.
4. Billing address.
5. Name, first and last, of person ordering
parts.
6. Telephone number.
7. Purchase order number.
8. Part number, description, and quantity of
each item on the order.
Do not order parts by key number or the figure
number of the illustrated parts. Indented items
indicate parts of assemblies. Standard hardware
is furnished only when part of a purchased
assembly. Please get hardware from a local
hardware supplier.
If the old part cannot be identified, send it to us
with the quantity needed specified on the order.
Any claim for loss or damage to a shipment in
transit should be filed promptly against the
transportation company making the delivery.
Shipments will be complete unless the packing list
or order acknowledgment indicates items back
ordered.
If parts received are suspected to be incorrect or
defective, please write, fax, or phone the
representative from whom you ordered the part.
They will give authorization for return and/or
handle replacement shipments when required.
RECOMMENDED STOCK ITEMS
Refer to the Parts List section for recommended
stock items. Stock Items are clearly identified with
a bullet preceding the parts description. See
example below:
Home
Find...
Go To..