Specifications

MAINTENANCE
53
Tennant 5300 (03–98)
4. Loosen the two mounting thumbscrews.
5. Pull the squeegee off the machine.
INSTALLING THE SQUEEGEE
1. Make sure the squeegee is raised.
2. Place the squeegee under the squeegee
pivot.
3. Line up the mounting studs on the
squeegee, with the mounting slots on the
squeegee pivot.
4. Mount the squeegee to the squeegee pivot
with the mounting thumbscrews.
5. Replace the squeegee suction hose on the
squeegee.
LEVELING THE SQUEEGEE
Leveling of the squeegee assures even contact
the length of the squeegee blade with the surface
being scrubbed. Make sure this adjustment is
done on an even, level floor.
1. Turn the machine power on.
2. Lower the squeegee.
3. Drive the machine forward, then turn the
machine power off.
4. Look at the deflection of the squeegee
blade, over the full length of the squeegee
blade.
09533
09462
Home
Find...
Go To..