Specifications

MAINTENANCE
Tennant 5300 (03–98)
48
4. If the skirt needs to be adjusted, loosen the
skirt band clamp and move the skirt up or
down to touch the floor.
NOTE: Replace the scrub head skirt when it is
damaged or no longer is able to touch the floor.
5. Tighten the skirt band clamp.
6. Raise the scrub head.
REPLACING THE SCRUB HEAD SKIRT
1. Turn the machine power off.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface and turn off
machine.
2. Raise the scrub head.
3. Loosen the skirt band clamp.
4. Pull the old skirt and band off the scrub
head.
5. Put the new skirt on the scrub head. Make
sure the holes in the skirt are facing the rear
of the machine.
6. Place the skirt band over the new skirt and
tighten the skirt band clamp.
7. Adjust the skirt as stated in ADJUSTING
THE SCRUB HEAD SKIRT.
09523
09524
09523
Home
Find...
Go To..