Manualshelf

Installation Guide

ManualsBrandsCALI BAMBOO ManualsEngineered HardwoodSavanna 9/16 in. T x 5.31 in. W x 72.87 in. L Wide Click Bamboo Engineered Hardwood Flooring (21.50 sq. ft.)
12345678910
Questions? (888) 788-2254
www.CaliBamboo.com
Engineered Flooring Installation Guide
• Acceptable Areas for Acclimation - Acclimate the flooring as close to the center of the installation area as possible. Do
not store flooring next to outside walls, in direct sunlight, near air vents or under conditions that don’t reflect the normal
home environment. Garages, and exterior patios, for example, are not acceptable areas to store wood flooring during
acclimation.
• Determine Appropriate Acclimation Time Frame - Cali Bamboo Engineered flooring should be allowed to acclimate on
the job site for 72 hours.
Optimum Flooring Moisture Content (%) by U.S. Region
This map is provided by the NWFA and relates to all hardwood flooring species. For each region, the average equilibrium
moisture content (EMC) for hardwood is identified for both January and July. The EMC is the MC (%) that the floor will reach
once it has fully acclimated to its environment. This is also the optimum MC for installation, and will provide a general idea of
what acclimation measures to take. In each pair of figures, the first number is the average EMC during January; the second
is the average EMC during July.
Note: Actual moisture content conditions in any location may differ significantly from these numbers. This map cannot be
reliably used as a basis for installation. The most reliable moisture-content numbers can be obtained at the job site.
Take moisture content readings of the flooring, subfloor and relative humidity to be sure.
To better understand the specific acclimation requirements for your home, refer to the chart below for correlations between
relative humidity (RH), temperature, and flooring moisture content (%). Referencing the weather conditions in your area, find
the combination of temperature and RH on the chart. This value represents the flooring moisture content to achieve during
acclimation for best results.
Values within chart’s shaded area represent environments with relative humidity (RH) and temperature capable of
maintaining the delivered moisture content of 6-10%. These are optimum conditions for maximum flooring stability. For
environments outside of this range, allow more time for acclimation. Depending on your local in-home conditions, the use of
humidification/dehumidification equipment may be recommended to maintain proper in-home environment.
(See next page for Moisture Content chart.)
Pre-Installation