Product Overview

Actuator
Material: - base and cover: polycarbonate
- base plate: aluminum
Motor: - AC voltage: 24 V - 120 V - 208 V - 230 V - 277 V; 50/60 Hz
Power requirements: 5.0 W, 7 VA
Power connections: - Terminal screws with auxiliary switch: 24 V only
- Wire lead length: 18” (45 cm), 24 V only
6” (15 cm), 120, 208, 230, 277 V
Auxiliary micro-switch:
0.0 A min, 0.4 A max, 24 V (24V actuators only)
0.25 A min, 5.0 A max, 250 V (120, 208, 230, 277 V actuators)
Ambient temperature range: 32 to 104°F (0 to 40°C) 24, 120 V
32 to 170°F (0 to 77°C) 208, 230, 277 V
Humidity: 95% non-condensing
Full Stroke Time: - On: <60 seconds
- Off: 6 seconds
Approvals: UL873, cUL Listed & CE
UL 1995 sec. 18 approved for air plenum and ducts.
Environmental: Indoor only
Power to Normally Open Actuators should be turned off during extended
idle periods.
*Models with "L" suffix have one long tailpiece on outlet to provide extra long
lay length for retrofit convenience.
Technical specication
Valve body
Material: - body: forged brass (optional low-lead brass)
- seat: machined brass
- stem: stainless steel
- two o-ring seals and paddle: EPDM
Flow: 1.0, 2.5, 3.5, 5.0, 7.5 Cv
Suitable fluids: water and glycol, low pressure steam
Maximum percent of glycol: 50%
Temperature range: 32 to 240° F (0 to 115° C)
Max. static pressure: 15 psi (1 bar) steam
300 psi (20 bar)
Max. close-off D pressure: 20 to 75 psid (138 to 517 kPa)
Close-off seat leakage: 100% bubble-tight
Connection: - sweat: ½”, ¾” 1” & 1 ¼”
- press: ½”, ¾” & 1”
- NPT female: ½”, ¾” & 1”
- SAE flare: ½”
- inverted flare: ½”, ¾” & 1” sweat, fittings separate
Lay length (press connections): size ½ inch: 3 ½"
size ¾ inch: 3
5
⁄8"
size ¾ inch (PL)*: 5"
size 1 inch: 4
1
⁄8"
NSF/ANSI 372-2011, Drinking Water System Components-Lead
Content Reduction of Lead in Drinking Water Act, California Health and
Safety Code 116875 S.3874, Reduction in Drinking Water Act, certified
by ICC-ES, file PMG-1360.
Z-one Normally Closed Valve Actuators Z-one Normally Open Valve Actuators
Code Description Code Description
Z111000 24V with auxiliary micro-switch 18” wire Z131000 24V with auxiliary micro-switch 18” wire
Z116000 120V with auxiliary micro-switch 6” wire Z136000 120V with auxiliary micro-switch 6” wire
Z113000 208V with auxiliary micro-switch 6” wire Z133000 208V with auxiliary micro-switch 6” wire
Z114000 230V with auxiliary micro-switch 6” wire Z134000 230V with auxiliary micro-switch 6” wire
Z115000 277V with auxiliary micro-switch 6” wire Z135000 277V with auxiliary micro-switch 6” wire
Z151000 24V w/auxiliary micro-switch terminal block Z141000 24V without auxiliary micro-switch 18” wire
Z161000 24V w/o auxiliary micro-switch terminal block Z146000 120V without auxiliary micro-switch 6” wire
Z121000 24V without auxiliary micro-switch 18” wire Z143000 208V without auxiliary micro-switch 6” wire
Z126000 120V without auxiliary micro-switch 6” wire Z144000 230V without auxiliary micro-switch 6” wire
Z123000 208V without auxiliary micro-switch 6” wire Z145000 277V without auxiliary micro-switch 6” wire
Z124000 230V without auxiliary micro-switch 6” wire
Z125000 277V without auxiliary micro-switch 6” wire
Z-one 2-way Valve Bodies Z-one 3-way Valve Bodies
Code Description Cv DP Code Description Cv DP
Z200041 Inverted flare 1.0 75 psi Z300041 Inverted flare 1.0 75 psi
Z200042 Inverted flare 2.5 50 psi Z300042 Inverted flare 2.5 50 psi
Z200043 Inverted flare 3.5 30 psi Z300043 Inverted flare 3.5 30 psi
Z200053 1/2” SAE flare 3.5 30 psi Z300053 1/2” SAE flare 3.5 30 psi
Z200411 1/2” NPT 1.0 75 psi Z300411 1/2” NPT 1.0 75 psi
Z200412 1/2” NPT 2.5 50 psi Z300412 1/2” NPT 2.5 50 psi
Z200413 1/2” NPT 3.5 30 psi Z300413 1/2” NPT 3.5 30 psi
Z200431 1/2” sweat 1.0 75 psi Z300431 1/2” sweat 1.0 75 psi
Z200432 1/2” sweat 2.5 50 psi Z300432 1/2” sweat 2.5 50 psi
Z207433 1/2” sweat low-lead brass 3.5 30 psi Z307433 1/2” sweat low-lead brass 3.5 30 psi
Z200512 3/4” NPT 2.5 50 psi Z300512 3/4” NPT 2.5 50 psi
Z200513 3/4” NPT 3.5 30 psi Z300513 3/4” NPT 3.5 30 psi
Z200515 3/4” NPT 5.0 25 psi Z300515 3/4” NPT 5.0 25 psi
Z200517 3/4” NPT 7.5 20 psi Z300517 3/4” NPT 7.5 20 psi
Z200532 3/4” sweat 2.5 50 psi Z300532 3/4” sweat 2.5 50 psi
Z207533 3/4" sweat low-lead brass 3.5 30 psi Z300533 3/4” sweat 3.5 30 psi
Z200535 3/4” sweat 5.0 25 psi Z300535 3/4” sweat 5.0 25 psi
Z200537 3/4” sweat 7.5 20 psi Z307537 3/4” sweat low-lead brass 7.5 20 psi
Z207537 3/4” sweat low-lead brass 7.5 20 psi Z300617 1” NPT 7.5 20 psi
Z200617 1” NPT 7.5 20 psi Z300635 1” sweat 5.0 25 psi
Z200635 1” sweat 5.0 25 psi Z300637 1” sweat 7.5 20 psi
Z200637 1” sweat 7.5 20 psi Z300737 1-1/4” sweat 7.5 20 psi
Z200737 1-1/4” sweat 7.5 20 psi Z300687 1” male union 7.5 20 psi
Z200687 1" male union 7.5 20 psi