Instructions

Technical specifications
Separator: 2”–4” ANSI 150 CLASS
2”–6” ANSI 150 CLASS (ASME)
Connections: - Air vent relief: 3/8” Female
- Drain valve: 1 1/4” NPT Female
Materials: - Separator body: Epoxy resin painted steel
- Air vent body: Brass
- Shut-off and drain valve body: Brass
- Int. element: Stainless steel
- Air vent seal: VITON
- Air vent float: Stainless steel
Medium: Water and non-hazardous glycol solutions up to 50%
Max operating pressure: 150 psi (10 bar)
Temperature range: 32–250°F (0–120°C)
Particle separation capacity: to 5 µm
Technical specifications of insulation
Inner part
Material: rigid closed cell expanded polyurethane foam
Thickness: 2 3/8” (60 mm)
Density: 3 lb/ft
3
(45 kg/m
3
)
Conductivity (ISO 2581): 0.16 BTU/in (0.023 W/(m·K)
Temperature range: 32–220°F (0–105°C)
Outer part
Material: Embossed aluminium
Thickness: 7-mil (0.70 mm)
Fire resistance (DIN 4102): Class 1
Head covers
Heat formed material: PS
CAUTION: Make sure that all the connecting pipework is water tight.
CAUTION: When making the water connections, make sure that the
hydronic separator connecting pipework is not mechanically over-
stressed. Over time this could cause breakages, with consequent water
losses which, in turn, could cause harm to property and/or people.
CAUTION: Water temperatures higher than 100°F (38°C) can be
dangerous. During the installation, commissioning and maintenance of the
hydronic separator, take the necessary precautions to ensure that such
temperatures do not endanger people.
Leave this manual for the user.