Install Instructions

Technical specifications of hydronic separator
1”, 1 1/4”, 1 1/2”, 2” NPT Female union
1”, 1 1/4”, 1 1/2”, 2” sweat union
1”, 1 1/4”, 1 1/2”, 2” press union
3/4” NPT Male
Union connections
Separator:
Drain valve:
Materials: - Separator body:
- Unions:
- Air vent body:
- Air vent hydraulic seal:
- Air vent float:
- Shut-off and drain valve body
Epoxy resin painted steel
Brass
Brass
peroxide-cured EPDM
PP
Brass
Medium: Water and non-hazardous glycol solutions up to 50%
150 psi (10 bar)
32 - 250°F (0÷120°C)
1/2”
2”- 4” ANSI 150 CLASS
2”- 14” ANSI 150 CLASS (ASME)
3/8” Female
1 1/4” NPT Female
Max operating pr
essure:
Temperature range:
Temperature gauge front connection:
Flanged connections
Separator:
Air vent relief:
Drain valve:
Materials: - Separator body:
- Air vent body:
- Shut-off and drain valve body:
- Air vent seal:
- Air vent float:
Epoxy resin painted steel
Brass
Brass
VITON
Stainless steel
Medium:Water and non-hazardous glycol solutions up to 50%
Max operating pressure: 150 psi (10 bar)
Temperature range:
32 - 250°F (0 - 120°C)
Technical specifications of insulation on union models
Inner part
Material: Closed-cell expanded PE-X
Thickness: 13/16” (20 mm)
Density: Inner part; 1,9 lb/ft
3
(30 kg/m
3
)
Outer part; 3,1 lb/ft
3
(50 kg/m
3
)
Conductivity (ISO 2581): - at 32°F (0°C); .16 BTU/in (0.038 W/(m·K)
- at 105°F (40°C); .26 BTU/in (0.045 W/(m·K)
Water vapour resistance coefficient (DIN 52615):
> 1.300
Temperature range:
Fire resistance (DIN 4102):
0 - 210°F (0 - 100°C)
Class B2
Technical specifications of insulation on flanged models (only for
2” to 4” sizes)
rigid closed cell expanded polyurethane foam
2 3/8” (60 mm)
3 lb/ft
3
(45 kg/m
3
)
0.16 BTU/in (0.023 W/(m·K)
32 - 220°F (0 - 105°C)
Embossed aluminium
7-mil (0.70 mm)
Class 1
Inner part
Material:
Thickness:
Density:
Conductivity (ISO 2581):
Temperature range:
Outer
part
Material:
Thickness:
Fire resistance (DIN 4102):
Head covers
Heat formed material:
PS