Brochure

Shut-off valve
Check valve
Three-way mixing valve
Clock
Outsidetemperature regulator
Pressure gauge
Outsidetemperature probe
We reserve the right to change our products and their relevant technical data, contained in this publication, at any time and without prior notice.
Caleffi North America, Inc.
3883 W. Milwaukee Road
Milwaukee, WI 53208
Tel: [phone] · Fax: [phone]
[e-mail] · www.caleffi.us
© Copyright 2014 Caleffi North America, Inc.
Hydro Separator 548 series
Hydraulic separator. NPT and sweat union connections 1", 1-1/4", 1-1/2" and 2". Epoxy resin painted steel body. 300 series stainless steel internal
baffle. Working temperature range of 32–210°F (0–100°C) with insulation, 32–250°F (0–120°C) without insulation. Glycol maximum 50%. Max. working
pressure 150 psi (10 bar). Supplied with: automatic air vent with automatic service check valve 1/2" NPT female outlet connection and brass body.
Drain ball valve brass body with hose connection. Pre-formed double density closed cell expanded PE-X foam shell insulation with external embossed
aluminium cover. 1/2 inch femaile straight thread thermometer pocket well front center.
Hydro Separator 548 series
Hydraulic separator. ANSI B16.5 CLASS 150 RF flanged connections 2", 2-1/2", 3", and 4". Epoxy resin painted steelbody. 300 series stainless internal
baffle. Vessel working temperature range of 32–220°F (0–105°C) with insulation, 32–270°F (0–132°C) without insulation. Glycol maximum 50%. Max.
working pressure 150 psi (10 bar). Supplied with: automatic air vent with 3/4"NPT female outlet connection and brass body. Brass body 3/4" NPT female
shut-off ball valve with T-handle for air vent. Drain ball valve brass body with 1-1/4"NPT female connection. Rigid closed cell expanded polyurethane
foam shell insulation with external embossed aluminium cover.
SPECIFICATION SUMMARIES
Application diagram
Hydro Separator NA548 series
Hydraulic separator. ANSI B16.5 CLASS 150 RF flanged connections 2", 2-1/2", 3", 4", 6", 8", 10" and 12". Epoxy resin painted steelbody. 300 series
stainless steel internal baffle. Vessel working temperature range of 32–220°F (0–105°C) with insulation, 32–270°F (0–132°C) without insulation. Glycol
maximum 50%. Max. working pressure 150 psi (10 bar). Supplied with: automatic air vent with 3/4"NPT female outlet connection and brass body.
Brass body 3/4" NPT female shut-off ball valve for air vent. Drain ball valve brass body with 1-1/4"NPT female connection for separator sizes 2–6"; 2"
NPT female connections for separator size 8–12". For separator size 8–12" only thermometer pocket well on front center 3/4" NPT female; and on inlet/
outlet flanges 1/2" NPT female. Rigid closed cell expanded polyurethane foam shell insulation with external embossed aluminium cover for 2, 2-1/2, 3
and 4 inch sizes. The separator is designed and built in accordance Section VIII, Division 1 of the ASME Boiler and Pressure Vessel Code and tagged
and registered with the National Board of Boiler and Pressure Vessel Inspector, and CRN registered, and stamped for 150 psi (10 bar) working pressure,
with ASME U stamp.