User Guide

7
WARNING: The symbol shown on the
removable ring indicates the presence of
magnets that generate a strong magnetic
field. This could cause damages to electronic
devices kept in its proximity.
1. Remove the magnetic ring containing the
two magnets, that during operation attracted
the magnetites.
2. Flush out the ferrous and nonferrous debris
by turning the handle to open the drain valve.
3. When finished, replace the magnetic ring
and close the drain valve.
Maintenance
Air vent
Eliminate air
collected in the
top of the body
by loosening the
top plug screw.
To perform maintenance
after isolating the separator,
simply unscrew the top cover
using the provided key
and remove the attached
internal element inside the
collection chamber.
Draining off dirt and ferrous impurities
Remove the magnetic ring (1) and drain the
collected dirt and ferrous impurities. This can
be done while the system is running, using
the key provided (2).
1
2
This multifunction device can also be used as a
dosing point to inject chemical additives into the
circuit. Codes NA545355 and NA545356 offer
integral isolation check valves making for a more
convenient dosing vessal, providing an easy
access point for routine system water treatment
in hydronic systems.
Dosing