Product Overview

DIRTMAG
®
NA5453 Series
Dirt separator with magnet in engineered polymer. NPT male threaded union and sweat union connections ¾” and 1”, press
union connections ¾” and 1”. Adjustable for either vertical or horizontal piping. Brass drain valve with hose connection.
Brass tee pipe fitting. Engineered polymer PA66G30 body with an external removable magnetic ring, neodymium rare-earth.
Engineered polymer PA66G30 cover. HDPE internal element removable for cleaning. EPDM hydraulic seals. Suitable fluids:
water or 30% maximum glycol solution. Maximum working pressure 45 psi (3 bar). Working temperature range 32 to 195°F
(0 to 90°C). Particle separation capacity: to 5μm (0.2 mil). Ferrous impurities separation efficiency: up to 100% removal.
Provide with optional integral inlet and outlet shut off ball valves for ¾” and 1” with NPT female threaded connections.
Shut-off valve
Ball valve
Check Valve
Temperature gauge
Differential
by-pass valve
Zone valve
Pump
FlowCal
TM
Hydraulic separator
Temperature probe
Safety thermostat
Regulator
Expansion vessel
3-way cock
Pressure switch
Test pocket
Gas filter
Gas regulator
Y-strainer
Fuel shut-off valve
Discal
TM
Anti-vibration joint
Pocket
Safety relief valve
Backflow preventer
Automatic
charging unit
Application diagram
Flow switch
Low pressure switch
Calef North America, Inc.
3883 W. Milwaukee Rd
Milwaukee, WI 53208
Tel: [phone] · Fax: [phone]
sales@calef.com · www.calef.com
© Copyright 2016 Calef
We reserve the right to change our products and their relevant technical data, contained in this publication, at any time and without prior notice.
SPECIFICATION SUMMARIES